-
Posts
28 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Posts posted by Hecker
-
-
3 hours ago, uncleanlatent said:
I just got my first MWS today! Picked it up a second-hand MWS CQBR M4 with a few mags at a decent price.
First thing off the bat, it’s beautiful, and all the mags are leak free.
A few strange things I’ve noticed, and I wonder if it’s normal or needs attention.
1. The bolt makes this pinging noise when dropped / shot, almost like a spring inside is moving around.
2. The upper and lower receiver has a gap between the two parts. The gap is large enough to look through and wobble around in the hand.
I watched Oil's video on using a hair band to fix it, but is there a more long-term solution?
Mine came loose maybe slightly worse ive seen other new mws's also with loose receivers out the box my recommendation would be to plop some rubber bands over the pegs on the upper. if you want to close the gap and stop wobble permanently shimstock would be the way to go or possibly tap grub screws on the bottom of the takwdown pegs to push up on the takedown pins but that could most likely weaken the upper when i find a spare for cheap ill give it a go and try
-
Also does anyone know someone who wants to sell a 10.5 inch outer barrel to the mws
-
On 19/09/2020 at 14:05, RMDavis said:
Here's an update on how my URGI build currently stands.
TM MWS CQBR - Base
HAO Industries MK16 Rail
Z-Parts URGI-1 Airborne Charging Handle
Z-Parts Daniel Defence 10.3" Outer Barrel
Magpul K2 Pistol Grip
Magpul ASAP QD Rear Sling Plate
Magpul M-Lok Hand Stop
Magpul Magazine Pulls
Magpul Clone MOE SL-K Stock (waiting for genuine to restock)
HAO Industries Geissele T1 mount
Vortex Optics Crossfire
Surefire Clone M300B Weapon Light
Arisaka Clone M-Lok Weapon Light MountWiitech Trigger Guard
Ergo Gapper
Angry Gun 4 Prong Surefire Flash Hider
Angry Gun Surefire Suppressor
Angry Gun Maritime Bolt Stop
PTS Griffin Armament BUIS
Ferro Concepts Slingster - Multicam Black
Ferro Concepts QD Sling Swivels
TacbeltsUK Suppressor cover - Multicam Black
SixG Brass Hop NubIt is without a doubt the best gun I have ever had the pleasure of owning and I now have no interest in anything other than GBBR's 😂
Performance is incredible, and other than the brass nub i have no intentions of changing any other internal parts.
On a rather warm day a couple of weeks ago it chrono'd at around 260fps using 0.32g and Abbey Predator Ultra gas, which is fairly close to the limit so I'm glad I didn't go for a tight bore inner barrel!
Apart from sourcing a Genuine Magpul Stock, Unity Tactical Mount and maybe an IR laser / torch I really don't think it needs anything else other than feeding with gas and bb's!
Would genuinely consider buying another M4 MWS in the future to build a longer rifle or maybe wait out and see how TM's AKM MWS gets on, who knows!?
Although I do keep looking at GHK 553's...
Anyway heres a few photos of my URGI!
How's it been holding up on abbey ultra!
Doubt you will respond to a post 2 years ago but i can only try
-
- Popular Post
- Popular Post
fuck sake lol i thought i put 330 😂
thanks i was wondering what people where going on about
- acrxil, Wavey_Gravey, lokkers and 2 others
- 5
-
18 minutes ago, Davegolf said:
The idea of the coins in the buffer is to increase the spring preload, but this does not protect the buffer from shattering, that is why the HSB has a rubber pad in there.
it isnt to stop the buffer from shattering its so when the buffer bottoms out the rear screw of the gas key cant come in contact with the back of the receiver denting it! also it stops the wider sides of the bcg from making small dents on the front edge of the entrance of the buffer tube
15 minutes ago, JimFromHorsham said:
It’s 200fps off where it could be so somethings not quite right is it ?
but if it’s nice and snappy and you are happy then so be it 👍🏼
never herd of a mws doing 530 fps out the box on a gas comparable to gg
-
18 minutes ago, JimFromHorsham said:
then something is way off , I’d be taking a much closer look at your rifle and chrono settings .idk its very snappy and abbey ultra is supposed to be weaker than gg and propane
ive done a complete strip down and nothings off, barrels been cleaned ive also replaced all the springs in the nozzle with a dytac set and its about the same maybe 3fps higher
could be the bbs ive got im going to order up some bls bbs as ive run out of those atm and currently using valkens because thats all i can get atm
-
1 hour ago, JimFromHorsham said:
@Heckeris your chrono set to MPS ?
no fps mate
-
31 minutes ago, Wavey_Gravey said:
135fps? That’s a little low is it not?
its confusing because i see people getting 313 fps with gg and propane and other getting 370 fps
-
Hello would just like to say thanks for all your help you have helped me decide on purchasing a mws
I love the gun and have had no issues with it apart from the receiver being gappy at the back and having casting seams which is a bif of a disappointment
Ive watched a few of ollies vids and Ive short stroked it using 2 10p coins in the buffer which has removed possibility of denting on the reciver and buffer tube
Im currently using abbey predator and im getting around 335 fps with 0.2 is this gas perfectly safe to use other than the nozzle spring breaking seen people get 313 fps on propane and green gas
-
38 minutes ago, Cipher-032 said:
Google Super Lube Multi Purpose Synthetic Grease
Grey tube, does any thing and everything and wont eat your seals.
Brilliant video (And I HIGHLY recommend their other videos)
thanks for your help very much appreciated
-
Would molybdenum dysulfide like abbey lt2 be good for lubricating the bolt or is there something better
-
Anyone know if you can fit real dust covers to the mws I'm wanting to put the magpul one on it
-
Hello I have a aap01 which is having quite the wierd issue at the moment
The hammer won't lock back if the trigger is held in semi and for some reason just taking the sear pack apart and putting it back together fixes the issue but for about 150 shots maybe and then it does it again! The sears have probably only done 2000 rounds total in the year that I have had it and there is no visible wear to the catch points
THE TM MWS thread
in Gas Guns
Posted
Anyone had experience with the g&p aluminium trigger box shell. Does it drop easier and will it take original sears etc im after it after trying to remove the stock one which was a literal pain in the arce!