Hecker

My Rarearms ar15 Mostly RS

Anyone had experience with the g&p aluminium trigger box shell. Does it drop easier and will it take original sears etc im after it after trying to remove the stock one which was a literal pain in the arce!

Mine came loose maybe slightly worse ive seen other new mws's also with loose receivers out the box my recommendation would be to plop some rubber bands over the pegs on the upper. if you want to close the gap and stop wobble permanently shimstock would be the way to go or possibly tap grub screws on the bottom of the takwdown pegs to push up on the takedown pins but that could most likely weaken the upper when i find a spare for cheap ill give it a go and try

Also does anyone know someone who wants to sell a 10.5 inch outer barrel to the mws

How's it been holding up on abbey ultra! Doubt you will respond to a post 2 years ago but i can only try

fuck sake lol i thought i put 330 ? thanks i was wondering what people where going on about

it isnt to stop the buffer from shattering its so when the buffer bottoms out the rear screw of the gas key cant come in contact with the back of the receiver denting it! also it stops the wider sides of the bcg from making small dents on the front edge of the entrance of the buffer tube never herd of a mws doing 530 fps out the box on a gas comparable to gg

idk its very snappy and abbey ultra is supposed to be weaker than gg and propane ive done a complete strip down and nothings off, barrels been cleaned ive also replaced all the springs in the nozzle with a dytac set and its about the same maybe 3fps higher could be the bbs ive got im going to order up some bls bbs as ive run out of those atm and currently using valkens because thats all i can get atm

no fps mate

its confusing because i see people getting 313 fps with gg and propane and other getting 370 fps

Hello would just like to say thanks for all your help you have helped me decide on purchasing a mws I love the gun and have had no issues with it apart from the receiver being gappy at the back and having casting seams which is a bif of a disappointment Ive watched a few of ollies vids and Ive short stroked it using 2 10p coins in the buffer which has removed possibility of denting on the reciver and buffer tube Im currently using abbey predator and im getting around 335 fps with 0.2 is this gas perfectly safe to use other than the nozzle spring breaking seen people get 313 fps on propane and green gas

thanks for your help very much appreciated

Would molybdenum dysulfide like abbey lt2 be good for lubricating the bolt or is there something better

Anyone know if you can fit real dust covers to the mws I'm wanting to put the magpul one on it

Hello I have a aap01 which is having quite the wierd issue at the moment The hammer won't lock back if the trigger is held in semi and for some reason just taking the sear pack apart and putting it back together fixes the issue but for about 150 shots maybe and then it does it again! The sears have probably only done 2000 rounds total in the year that I have had it and there is no visible wear to the catch points