*****will deliver or meet up to 80 miles from my location****
I am selling my Longbow SRS anniversary addition that I purchased last year and have had on display since but never taken out of the house.
It comes with:
*****Please note I have replaced the vortex venom scope with a hawke vantage 3-9x 40 scope which is much more suited to Airsoft.
Nuprol carry case
5 cerakote mags with the upgraded followers
.45 & .48 ammo which the gun has been set up to use by longbow.
Silverback Display stand.
2 double mag pouches in tan
Here is the original link of the gun when I bought it last year.
https://www.longbowbb.co.uk/product-page/longbow-7th-anniversary-srs-the-devil
Here is the upgraded spec
Silverback Covert Rifle
Professionally Cerekoted Receiver, Handguard & Magazine
Hawke vantage 3-9 x 40 IR illuminated mill dot scope.
Laser engraved "7th Anniversary" EdGi Silver handle & cylinder
Laser engraved "7th Anniversary" EdGi Stainless Steel 420 True Dualbore inner barrel
EdGi SAP Piston with 150g weight
Silverback Classic Dual Stage Trigger
Silverback Fasthop
Silverback 70 Degree Buckingp
Version 3 Chub Nub
Silverback 120nm Spring
Silverback G-Spec outer barrel
Silverbackl G-Spec A1 to A2 G-Spec adaptor
Silverback Carbon Outer barrel/Suppressor
Silverback Carbon Outer Barrel Foam Baffles
Silverback Full length top RIS rail
Silverback SRS Stand
I am wanting £800 and I am willing to travel 80 miles radius to deliver or meet to assist the sale. My location is York
I would want to see it in the flesh if I was buying it.
Brand new never been used. Come with 2 batteries charger and 2 sun screens. Also with rail.
Bought from optics warehouse and never used.
Would prefer collection but will post special delivery at a cost of £20 as I will send this special delivery as I am not risking the shower that is PF.
£500 + delivery as above if required.
Payment via PayPal FF or Bacs.
I am selling my Longbow SRS anniversary addition that I purchased last year and have had on display since but never taken out of the house.
It comes with:
*****Please note I have replaced the vortex venom scope with a hawke vantage 3-9x 40 scope which is much more suited to Airsoft.
Nuprol carry case
5 cerakote mags with the upgraded followers
.45 & .48 ammo which the gun has been set up to use by longbow.
Silverback Display stand.
2 double mag pouches in tan
Here is the original link of the gun when I bought it last year.
https://www.longbowbb.co.uk/product-page/longbow-7th-anniversary-srs-the-devil
Here is the upgraded spec
Silverback Covert Rifle
Professionally Cerekoted Receiver, Handguard & Magazine
Hawke vantage 3-9 x 40 IR illuminated mill dot scope.
Laser engraved "7th Anniversary" EdGi Silver handle & cylinder
Laser engraved "7th Anniversary" EdGi Stainless Steel 420 True Dualbore inner barrel
EdGi SAP Piston with 150g weight
Silverback Classic Dual Stage Trigger
Silverback Fasthop
Silverback 70 Degree Bucking
Version 3 Chub Nub
Silverback 120nm Spring
Silverback G-Spec outer barrel
Silverbackl G-Spec A1 to A2 G-Spec adaptor
Silverback Carbon Outer barrel/Suppressor
Silverback Carbon Outer Barrel Foam Baffles
Silverback Full length top RIS rail
Silverback SRS Stand
I am wanting £850. This will need collecting in York, and considering the value it is the most sensible option for both parties. I would want to see it in the flesh if I was buying it.
I am selling my Krytac P90 that I bought for CQB but never really used. Been used in 3 outdoor games and is in excellent condition.
It comes with.
S&T armaments case
Laylax rear sling attachment
Bungee carry strap
PEC box
Fake surelight torch
dual switch for the PEC and Torch.
Vector Optics SPARC red dot (£190)
Novritsch Moderator with cover
Acetech Bitfrost tracer
5 genuine Krytac mags
1 TM high capa mag
There is a ding on the silencer end that I have shown and some light marks around the trigger otherwise it’s is in excellent condition.
Here is the upgrade list that was professionally done at Ex-machina in Huddersfield.
It has been set up to run on both 7.4v and 11.1 and is also set up for .32 BBs.
ADV: This is beast mode, Range, Accuracy, Trigger Response, ROF.... It's about as good as a Krytac P90 can get without running off the Price-to-Performance cliff. The big hitter here is the new motor, you'll get significantly improved efficiency, the trigger response will be night and day compared to stock.
EXM CNC Nozzle
PDI CNC Cylinder
GATE CNC Piston Head
CYMA FMR Piston
GUARDER Main Spring
GUARDER Tappet
FLT CNC Bushings
SHS CNC Bevel Gear
LONEX CNC ARL
WARHEAD Brushless Motor
ZCI Inner Barrel
EXM Bucking
EXM Flat Nub
Total upgrade cost was £500
I am wanting £400 would prefer collection but will post for an additional £15
If collected the buyer can have the 4 batteries I have for it, but. Aren’t posting them sorry.
Has anyone got any experience of these adapters, are they better or worse than the airtac adapters?
https://uk-airsoft.co.uk/product/sp-system-m4-series-hpa-adapter-and-magazine-for-tokyo-marui-mws-gbb/
SP SYSTEM – M4 SERIES HPA ADAPTER AND MAGAZINE FOR TOKYO MARUI MWS GBB
Has anyone else’s sites been affected by the change in Legislation with HPA bottles. My local site are now checking HPA bottles and refusing use of any that are PI marked (Stamped TT) after 01/01/23. This means my brand new carbon tank I bought 3 months ago and is currently unused now is not site legal.
All tanks dated after 01.01.23 have to carry the British RHO standard marked as a (P) on the bottle.
The insane thing here is suppliers are still selling HPA tanks with only a TT on.
We have been given this as a guideline
I have 4 TM MWS variants that all have Federal Concepts NPAS valves, but I have gone done the HPA route and bought adapters from airtac.
question I have is should I change the NPAS valve back to standard as I am seeing a 10 fps fluctuation which I wasn’t expecting with HPA?
Another noob question regarding home bottle filling. I have been watching a lot of you tubes, and I am right in thinking that the fill valves on HPA regulators are one way.
so once the pressure is drained from the line at the compressor bleed screw it is safe to disconnect the line. There is also no danger of bleed back if a half full tank is connected to be topped up?
So have read all that thanks and looked at what is out there I have decided on a ninja v3 it’s a 4500 psi reg and the output pressure in set at 550 psi from the factory.
Sounds perfect to me.
https://www.justpaintball.co.uk/products/ninja-pro-v3-regulator-4500psi
I need some help please. I bought and Armotech 1.3l 4500 psi tank to work with my storm cat 5. But I ordered it with out a fill regulator on it as I didn’t realise. What fill regulator will work with this set up please?