Pollynator_bravo2

It’s a nuprol defender. It’s got a six inch poly hand gaurd that splits into a top and bottom halves. The top half has forks which locator in a grove where the barrel nut (I think that’s what it’s called) site. The forks tho are crap and the tangs snapped hence the need now to replace.

Not sensor related, piston head came off 🤔🤦‍♂️

So in the end I went back to the original gear box and the issue persisted. however it looked like the nozzle was coming back to soon so I removed the delay chip and boom back up to fps as before. There are the odd inconsistencies but it played well on Sunday until the end of the last game when the Titan brought up a fault I’m yet to investigate but guessing it will be sensor related

So I am looking to replace my plastic hand gaurd with a metal one but I’m not sure if it’s as easy as a like for like swap will I need any parts other than the guard?

Cheers. I opted for the delete as the pictures related to solved issues mostly so I’m now back fully charged haha 😛

Hey - does anyone know how I get my photo size back up. It’s gone down every post I make and it’s so small now I can’t add any pictures ?

Hey folks - wanted to post a picture on a post but the size limit has decreased so much that I can’t post it. How do I get this fixed ?

Will do for sure. It’s been a proper head scratcher

Cheers. so the barrel is original but I’ve popped an omega nub and 60degree MAPLE Leaf macron bucking on it. This was before the gear box change when it was popping out around the 300 mark. I’ve started to build the old gear box back up and moved away from the retro one. It was laziness tbh as the retro one could easily take the Titan unit as it was gate ready however the old one I wasn’t sure about although it’s a King Arms so probs would of done. I had the split gb for another project previously and chose not to use it now I wish I hadn’t. The broken tooth is on the drive part of the gear not the actual cylinder loading section which I was confused with. Once I pop the old one back in I’ll check the results. The cylinder compression both with and without the nozzle is now excellent

Standard M4 normal speed gears nothing to high speed nor torqued up. Think the ratio. Is 18:1 but not sure it was as in the mechbox. It’s had a Titan basic put in it, new tapet plate (old one snapped when separating the gearbox for fps loss investigation), new nozzle and cylinder head due to fps loss testing. That’s it though. When it was all together fps dropped from 305 to 100-120fps. I found the sector tooth broken by chance when looking to see if there was an issue with the Titan settings as it looked like it was pre cocking but it wasnt

Afternoon all, has anyone had any experience with the retro arms split v2? I brought one as I thought it looked a handy idea and piped it together. I’ve found though a loss on fps when I’ve investigated things there was no obvious culprit however I’ve now found the sector gear has lost a tooth. I have already set up and spaced the gears and checked the AOE and it all looked good so I’m now stuck for ideas

Hey folks - I don’t know if there is anyway i can sort this but when I was playing at FFZ a couple of weeks ago and I lost the cover for the battery compartment. It’s a theata optics 4-16x50 AOE scope. Any ideas where I can get a spare??

Ah that’s excellent thanks

Awesome thanks !!!

Afternoon Folks ive gotten access to a 3D printer and I want to make some bits n bobs for my Airsoft kit but I don’t have the first clue on where to find ready made designs. Is this even a thing that’s out there ?

I can’t avoid visiting tack and gun sites and when I do I guarantee that my Apple Pay gets hammered and a week long ferry of parcels arrive lol

Man that’s sick !!!

I’ve popped a few out in the yard and they seem as good as any I’ve had before. Truth will show on the 22nd tho

I don’t know if you can see the blend of gas but Butane is most effective and efficient at high temperatures where as propane is good all round but not efficient plus it’s more expensive. I’m very cold temperatures butane is about as much use as a cart horse with no legs

I’ve got my next game in the 22nd. I’ll judge then but some of the lads on the team have also brought some so I should get a good bit of feedback. Might even stick some through a gun today/tomorrow

From my experience if it’s constantly coming in low but around the same value in terms of fps I’d look at the air seal and timing. If it’s inconsistent I’d look towards tappet sticking or the nozzle not consistently travelling parallel with the hop

Sometimes you gotta go balls out lol

Ditto to this. My games were spoiled by pants ppe leaving me with steamed up goggles or glasses etc. I’d recommend playing a few games and feeling out your style plus you need to grab a UKARA unless your going two tone. My list would be Edge safety specs, a decent pair of boots (one twisted ankle and that’s your day done), then head protection, gloves, then go for weapon systems. find your style first so you get what ever is most suitable to your style of play. Or you will end up in my work of Airsoft spending heaven ………….. or divorce lol

Got 20kg coming from warhead so I’ll see how they go haha