Twinadad

no worries dude I didn’t think you was trolling. If you don’t ask you can’t know 🤙🏼 Well it’s Co2 anyway which equals 800psi however…. I believe they sell nozzle valves for different variations. Ie CQB, milsim, skirmishes so I’m hoping to reduce the pressure going out the barrel and deflect it into the recoil. That bit I’m not so sure on. I’ve read changing recoil spring can either increase fps but decrease recoil, and increase recoil reducing fps. so hopefully will get it to 350fps but with a stronger kick 🤞🏼🤷🏻‍♂️ I have a question how much do you know about HPA? Would like to pick your brain seen as your trolling 🤣🤙🏼🤭🤐 ps in pictures the red nozzle are different

This is not going to be your regular tapped green gas mag. This is a Co2 magazine which is capable of 800psi which I would like to simulate the kick and feel but without the costs and all the other variables that go with using Co2. so here is the beginning of what I hope is going to be a successful first. 🤞🏼 this is my v2 magazine with a dummy Co2 cartridge with both bottom and side port however I’m being advised that because of the hard blowback it’s not good for HPA as it will use a tone of air which is completely understandable but it’s got to be cheaper the Co2 using the same amount… right? so I’m looking at the first strike hero with reg 124ci however is this over kill? I would love to use a smaller tank but don’t fancy running out mid game. They recommended that this tank will get 1875 shots per fill! A good marker for paintball runs high pressure most needing high to operate effectively. So when they say you get xamount of shots per fill is this with low pressure or high pressure as I want 850psi or maybe higher as I want to get a 150% recoil spring so yes it will reduce power but kick harder. before you plastic internals pipe up she is solid steel. Granted I might get through some buffer pads 🤣 but it’s worth it

It run’s on both green and co2. I kinda wanted this gun because I know how well she is built ultimately meaning harder kick, more realism and a little more scary when you come face to face with it 😬🤠 whilst being very adaptive as I can run green gas. But unless it’s vorsk V12 220 psi it feels farty 🤣 only way to describe that and at crazy 20 a can if and when you can get it. That’s a pain Co2 just has a nicer kick. But again slightly on the expensive side unless you buy a box of 500. Hense why HPA seems to be pulling me

How long for?

What made you want to give it up? If you don’t mind me asking

Thanks dude appreciate the feedback. I don’t mind having a line over realisability 💯 tank, reg, line, plus the dummy co2 cartridge that allows side port so you don’t have a line out the bottom of the magazine. However only in America at $30 a pop plus shipping £80 later 😫 but slowly building up the materials needed to run it on HPA oh plus co2 magazines at €69 as green gas I don’t think will hold the pressure as its ideal psi is from 140-220 unless Im wrong then please advise 🤑

Thinking of turning this into HPA? What’s your thoughts? don’t get me wrong she’s hitting 2j on CO2 and that is definitely not legal. Punchy!!! 🤭😬 so I’ve put the red valve in her and she at a comfortable 1.2j this is the navy version also known as the Asia version which is stupidly hard to get hold of and I’m extremely lucky to grab one while they were available. However I think it will be awesome converted to HPA green gas is a load of hassle and temperature in the U.K. means I have to have 4 different colours for it not to run to hot. Co2 is seriously hot and hits a whopping 467fps 1.9j which for a full auto is classed as a firearm so that’s definitely a big NoNo so HPA seems to be very appealing what with regulator being easy adjusting and so much cheaper long turm. Granted it’s expensive to get things started but what isn’t nowadays 😢

Hi I have the V2 and want to convert it to HPA WHATS YOUR THOUGHTS ON THIS? Been looking everywhere and to my surprise no joy. I thought this would have been done already. Maybe I’ll be the first 🤩

Hi I’m new to Airsoft. And being a 90’s kid the MP5 was the most iconic gun and one I was always using in video games growing up. So finding Airsoft this late in life For more fitness soon became a fast growing obsession and love for this sport. So I decided to go hard or go home 😜 so I ordered the new version and was actually surprised after realising this is hard to obtain in the uk especially the Asia version 🤩was lucky enough to get the new Mp5 vfc v2 gbb and after playing quickly wanted HPA 🥴 can anyone shed some light on the new mp5A5 vfc v2 GBB on conversion to HPA.