bas1xx

Clearly not allowed to be grateful of the help I received it seems... when I truly am? But saying I am a mental defective? Seems a bit far fetched coming from someone who is a ''real Space Soldier in the 40th Century''

A new selector plate can 'easily' be dropped back in. If you aren't technically minded you shouldn't be running a highly modified gun you cannot fix yourself if something goes wrong. But... at the end of the day were all larping, if you can convince yourself that you're in the special forces doing a mission in a forest in Sussex, you can convince yourself that you are a tech. Thanks for the help chaps.

As you probably know, anything mechanical can easily be un done. why do something to an Airsoft gun that can't be un done in the future if you decide another path? Are you 'negative Airsoft' from YouTube by any chance?

the dmr, but fast and snappy for outdoor use, for cqb id just stick the stock set up back in the gun

so you think its worth going for the 30k and the sp120 or sacking that off and going with the stock krytac 20k, the spring I was using with that (sp110) and a mosfet in the future? the reason I wanted to go with the higher spring was as it was already at 400fps and it had to be locked to semi anyway, why not go to the top of the dmr threshold at 425fps

the gun is mechanically locked to semi my friend.

to be honest Im not even after a high rof, jut want to pull my sp120 spring no problem with a snappy trigger response

alright cool, so if I get the asg 30k motor instead, ill still be able to pull the sp120? and should fix the issue?

I've never ran this set up with the m100, so say I installed a titan, with the motor pre braking would it fire perfect?

hey guys, just installed sp120 spring into my leg with a new asg 40k motor and I'm getting some over spin every now and then, it looks like the air nozzle doesn't reset properly after each shot. and then it'll fire double, to fix it I just do a quick full auto burst and its fine again I have a Krytac trident mk2 crb for batteries, I use this as my main 11.1v 1300 25c, 50c cont https://www.patrolbase.co.uk/asg-11-1v-1300mah-25c-lipo-crane-stock-batteryand I have an 11.1v 1100 20c 40c cont as a backup too. this one https://www.patrolbase.co.uk/1-vp-racing-11.1v-1000mah-20c-lipo-stick-battery I've read that battery could be the issue with the discharge rate, could getting either of these fix the issue? looking at either of these... https://hobbyking.com/en_us/turnigy-nano-tech-1200mah-3s-15-25c-lipo-airsoft-pack-1.html https://hobbyking.com/en_us/turnigy-nano-tech-1400mah-3s-15-25c-lipo-airsoft-pack-1.html not looking to buy a mosfet just yet with active braking. maybe in 4 weeks or so thanks

Alright sounds good guys. by the sounds of it for cqb I'll drop in the stock set up and then for outdoors remain with what I've got. and then look into upgrading the mosfet in my gun to a gate titan in the coming months. Full auto isn't an option on the gun as its locked out and quite frankly I don't agree with full auto spam either.

hi, I own a Krytac trident mkii crb... I am running asg 40k motor with sp120 spring with an 11.1v for outdoors.I'm wanting to play CQB where the limit is 328 fps but an allowable limit of 350fps.I am from the UK so in my spares I have the stock m100 spring and the stock 20k motor.Can I swap the spring back to the m100 with the 40k motor and a 7.4v battery, or will I get PME? - as I know with m100, 40k motor and 11.1v I'll get pme.if not for cqb ill have to put it back to stock.