RAM

Hi I have a Wolverine MTW with a inferno gen 2 engine. Long story cut extremely short the Spartan board is dead so I purchased a Gorilla FCU to replace the Spartan and I am wondering if anyone here has done the same and might be able to help me with the settings. I am a total newb when it comes to HPA so any help with setting up the FCU would be greatly appreciated.

Well I just checked it and it all looks fine to me. But on a good note I figured out how to get the mags to load without pressing the mag release button. I have to twist the mags slightly for them to slide home. Now I just have to wait for the new nozzle and cylinder head to hope I it solves the low FPS as I don't want to have to buy a new inner barrel to get it back to stock length.

I thought it was metal i will double check tomorrow. Thanks for the pictures.

Just had a look at the parts diagram and it looks like the mag release is stock.

Hi the gun is not new it is used. I tried tipping the mags forward as I was loading them and backwards nothing seems to allow them to lock home unless I press the mag release slightly, It only needs to be pressed about 1mm for it to allow the mags to then slip into place, Every mag looks OK to me with now signs of damage or wear. The mag catch looks standard to me but having never owned a Vector before I can't be 100% sure. I have tried to get some pictures to help with this.

Sorry I think my explanation might be misleading. I cant get the mags to lock into the magwell unless I press the mag release as where on my other AEG'S which are M4 platforms I can just push the mags into the magwell and they click into place and lock without having to press the mag release button. Hope this makes a bit more sense.

Hi I just purchased a Krytac kriss vector and I have to press the mag release to get the mag to load. Is this normal or do I need to check that something is not binding up ?

Thanks for the idea I did itand it created a small gap to let me see that there was a plate around the back and figure out how to do it which it use a flat head screwdriver and gently lever it forward from the receiver. It was binding on the mock gas tube. Added a photo for reference just incase anyone else has this issue.

Hi can anyone help me with solving how to remove the handguard from the Specna Arms SA-V38 (Sailent Arms GRY). I have looked for screws around the outside but can't find any and I have also pulled the pin at the bottom and lifted the catch in the hope that is how you get it off like on the real version but it doesn't want to budge and I don't want to break it. The reason I want to remove the handguard is so I can clean the outter barrel before having a go at painting the rifle. If anyone knows how to remove the handguard I would very much appreciate the info on how to do it.

Thanks guys for the help I have ordered from ak2m4.co.uk these parts hoping that I can get it working right for this coming Sunday game at Apocalypse. SHS (RA) M4 Cylinder Head Aluminium (Pad) SHS (RA) Piston Head (Double O-Ring Aluminium) Rocket 15 Tooth Piston

Hi guys I bought a used G&G Armament CM16 LMG which I chronographed last night and was only shooting at 230fps 0.56 joules and decided to change the spring over to a Element M95 spring which got it to roughly 295fps and 0.9 joules. So decided to have a go at Shimming it and also give it a clean up and check stuff. I found that the cylinder and piston wasn't really holding air pressure properly but I am not sure what Cylinder head and such to replace it with. I did try cleaning the old grease off and applied new grease but it only seems a bit better so I would like to replace the parts. I understand it is a V2 Gearbox and that it is not a true LMG more of a hybrid but I am not sure if I should buy the LMG Cylinder head or just the regular V2 Cylinder head. This is what I was looking at. https://www.patrolbase.co.uk/asg-ultimate-cylinder-head-lmg-version https://www.patrolbase.co.uk/asg-ultimate-cylinder-head-v2 This is what is in there at the moment of it helps. Any advice would be very much appreciated.

@Rogerborg thanks very much for the help I will give it a go with the velcro and hopefully it will stop being a pain in the neck. Apart from that issue I'm loving using it and had a blast on Sunday with it at Apocalypse which was the 1st time I got to use it.

Hi guy can anyone give me an idea to what is causing this problem. I bought some Bolt mid cap magazines for my ARP 556 which is brand new and unless the magazine in pulled back towards the grip it won't fire any BB's out if I eject the magazine it drops about 4 BB's. If the magazine if slightly forward it won't fire any BB's if I use the hi cap magazine it works fine.

Thanks very much

Hi guys I have a friend that I have started playing airsoft with that has to work every Sunday and was looking for sites that do Saturday games. We have played at Apocalypse in Kent and also Battle station activity centre in Snetterton which was a long drive 2.5 hours. Is there anywhere around Kent or London that does Saturday games that adults can play as Apocalypse only do under 18 games on Saturday which is a pain. As we are both way past that age point 😂