RAM

Hi I have a Wolverine MTW with a inferno gen 2 engine. Long story cut extremely short the Spartan board is dead so I purchased a Gorilla FCU to replace the Spartan and I am wondering if anyone here has done the same and might be able to help me with the settings. I am a total newb when it comes to HPA so any help with setting up the FCU would be greatly appreciated.

Well I just checked it and it all looks fine to me. But on a good note I figured out how to get the mags to load without pressing the mag release button. I have to twist the mags slightly for them to slide home. Now I just have to wait for the new nozzle and cylinder head to hope I it solves the low FPS as I don't want to have to buy a new inner barrel to get it back to stock length.

I thought it was metal i will double check tomorrow. Thanks for the pictures.

Just had a look at the parts diagram and it looks like the mag release is stock.

Hi the gun is not new it is used. I tried tipping the mags forward as I was loading them and backwards nothing seems to allow them to lock home unless I press the mag release slightly, It only needs to be pressed about 1mm for it to allow the mags to then slip into place, Every mag looks OK to me with now signs of damage or wear. The mag catch looks standard to me but having never owned a Vector before I can't be 100% sure. I have tried to get some pictures to help with this.

Sorry I think my explanation might be misleading. I cant get the mags to lock into the magwell unless I press the mag release as where on my other AEG'S which are M4 platforms I can just push the mags into the magwell and they click into place and lock without having to press the mag release button. Hope this makes a bit more sense.

Hi I just purchased a Krytac kriss vector and I have to press the mag release to get the mag to load. Is this normal or do I need to check that something is not binding up ?

Thanks for the idea I did itand it created a small gap to let me see that there was a plate around the back and figure out how to do it which it use a flat head screwdriver and gently lever it forward from the receiver. It was binding on the mock gas tube. Added a photo for reference just incase anyone else has this issue.

Hi can anyone help me with solving how to remove the handguard from the Specna Arms SA-V38 (Sailent Arms GRY). I have looked for screws around the outside but can't find any and I have also pulled the pin at the bottom and lifted the catch in the hope that is how you get it off like on the real version but it doesn't want to budge and I don't want to break it. The reason I want to remove the handguard is so I can clean the outter barrel before having a go at painting the rifle. If anyone knows how to remove the handguard I would very much appreciate the info on how to do it.

Thanks guys for the help I have ordered from ak2m4.co.uk these parts hoping that I can get it working right for this coming Sunday game at Apocalypse. SHS (RA) M4 Cylinder Head Aluminium (Pad) SHS (RA) Piston Head (Double O-Ring Aluminium) Rocket 15 Tooth Piston

Hi guys I bought a used G&G Armament CM16 LMG which I chronographed last night and was only shooting at 230fps 0.56 joules and decided to change the spring over to a Element M95 spring which got it to roughly 295fps and 0.9 joules. So decided to have a go at Shimming it and also give it a clean up and check stuff. I found that the cylinder and piston wasn't really holding air pressure properly but I am not sure what Cylinder head and such to replace it with. I did try cleaning the old grease off and applied new grease but it only seems a bit better so I would like to replace the parts. I understand it is a V2 Gearbox and that it is not a true LMG more of a hybrid but I am not sure if I should buy the LMG Cylinder head or just the regular V2 Cylinder head. This is what I was looking at. https://www.patrolbase.co.uk/asg-ultimate-cylinder-head-lmg-version https://www.patrolbase.co.uk/asg-ultimate-cylinder-head-v2 This is what is in there at the moment of it helps. Any advice would be very much appreciated.

@Rogerborg thanks very much for the help I will give it a go with the velcro and hopefully it will stop being a pain in the neck. Apart from that issue I'm loving using it and had a blast on Sunday with it at Apocalypse which was the 1st time I got to use it.

Hi guy can anyone give me an idea to what is causing this problem. I bought some Bolt mid cap magazines for my ARP 556 which is brand new and unless the magazine in pulled back towards the grip it won't fire any BB's out if I eject the magazine it drops about 4 BB's. If the magazine if slightly forward it won't fire any BB's if I use the hi cap magazine it works fine.

Thanks very much

Hi guys I have a friend that I have started playing airsoft with that has to work every Sunday and was looking for sites that do Saturday games. We have played at Apocalypse in Kent and also Battle station activity centre in Snetterton which was a long drive 2.5 hours. Is there anywhere around Kent or London that does Saturday games that adults can play as Apocalypse only do under 18 games on Saturday which is a pain. As we are both way past that age point 😂

Thanks guys for the help and suggestions I will look at getting the MK23 too.

was just wanting to get a it a little quiter for when playing CQB and needing to be a bit of a Sneaky SOB as I know I was getting spotted easier because of the noise from the hog. If the Silent piston heads are not that good would you recommend something else ? One day I might be able to get a HPA but if I was to even attempt it at the moment I would be dead lol.

Hi Me and a friend have ICS CXP HOG aeg's and was wanting to make them a bit quiter we are interested in purchasing the following parts SHS M4 Cylinder Head Aluminium (Silent) SHS Piston Head Silent (Aluminium) SHS Tappet Plate (V2) SHS M4 Aluminium Nozzle Double O-Ring (21.4mm) SHS 16:1 Gears SHS Stainless Steel Cylinder (3/4) We were wondering if this would be a good setup along with what upgrades we have already carried out which are Maple leaf super macaroon hop rubber & omega hop up tensioner, Maple leaf crazy jet inner barrel (260mm long), M95 Spring cutdown to get to 346FPS & Gate Warfet. running on deans 7.4 lipo 1300mah Any suggestions would be appreciated as we are both new to this.

Thanks for the information @EDcase I quite like the goggles and at a decent price too. in your honest opinion which make would you say would be best for the upgradeability ? Thanks @Steveocee I didn't realise that the barrel lengths didn't have an effect on the rifles like they do on real firearms. Where did you get your Heroshark specs from ? Is there any particular AEG that you would recommend with the type of barrel length that I am looking for that is good for upgrades at a later date ? @Steveocee

Hi all been lurking on here for the past couple of days reading and researching but still don't have my gun and won't do till the lockdown is finished and I can get the 1st few games underway with to get my UKARA. I live in the Kent area a stones throw from the Apocalypse site, so maybe I will get to meet some of you when I get to go. I have been looking at AEG's and whilst I love the G&P Salient Arms SAI GRY M4 (Short) (Yep another one who loves the film 13 Hours) I was also looking at a few others that are of a similar style but I am not sure as I have read so many reviews where some say that such and such make is good then another will say they have issues with it. I know a lot is down to personal preference. In short me and a mate are really serious into getting into this so don't want to waste money buying the wrong setups. both of us are fairly short and not having very long reach plus we both like the idea of having a go at CQB but don't want to limit ourselves to just that so we was wondering if there was a AEG AR15 style that was able to be used for both assualt (More Open Spaces) as well as CQB in the way that the barrels are not to long so clearing rooms etc wouldn't be to much of an issue. We have both decided that for the moment we will forget about buying sidearms till we have had more time to get into the play styles and such. The rifles that we have looked at that we seem to like is these. G&P Salient Arms SAI GRY M4 G&G GC16 ARP 556 FULL METAL MOSFET BLACK G&G PDW15-CQB HONEY BADGER EVOLUTION DYTAC M4 MK4 SMR 10.5" A-TACS AU LONE STAR EDITION KRYTAC MK II War Sport LVOA-C The type of things we are looking for in the rifle is as I mentioned above something that we can use in open spaces as well as CQB, also we want to be able to have the option to upgrade too. we know that it might not be possible to have all these options hence why I am asking you wonderful people (Passes over the sick bag) for your knowledge and advice. I also have another question. this is about Face protection. I personally have to wear glasses and my eye sight is bad without them and I know from personal exprience that Goggles to tend to fog up with me from playing paintball before. What is a good fullface protection that is like the DYE full face mask and is there any out there that have a fan in them to help with the anti fogging ?