LoonyToon

This is as good as new, never been fielded just use to shoot in the back garden and sit on a shelf Totally Standard with 2 extra Mags Selling as now only using HPA setups Price is £395 (RRP was £560 with additonal mags) Located in Oxford Can post at buyers expense http://www.secutorarms.com/rapax/108-rapax-xxi-m4.html SPEC IS BELOW RAPAX XXI M4 - New hop up rubber for heavier bbs - Two 7.62 mm magazines (not 5.56 mm) included in the box - 2 different textile accessories: cheek rest on the stock and handguard cover - 45° sights included, allowing to mount a scope - Adjustable stock in length - Ergonomic pistol grip with anti-slip texture - Programmable electronic trigger - The fire selector has 3 modes: safe/semi /auto by default out of the box. But, thanks to its interchangeable fire selector, it can be let in 2 modes: safe/semi, blocking physically the automatic position. - Quick spring change system - 6.03 mm precision barrel - Mosfet included - Silencer included - QD sling swivel included - Adjusted as standard to 445 FPS with 0,20 g bbs - 2 models to choose: M3 and M4 - Combination of bearings and 8mm bushing - Piston with all metal teeth - Silver wiring

Used, and only sellings as have HPA'd one the RIF Great bit of kit if you want to tune you gun, and/or make it a DMR as it has lots of programmable functions £30 Inc Recorded Delivery ETU++ is a dedicated replacement for G&G ETU electronic board. It enhances your trigger unit by adding many new, useful features. Simply disconnect the stock electronic board and plug in ETU++. The stock trigger unit (switch set) is retained, so there is no need to open the gearbox. Works with any G&G ETU replica, as well as 7.4V, 11.1V and 14.8V batteries. Feature description Independently programmed firing modes - Program the firing modes any way you like, setting safe, semi, burst, or auto on both selector positions. Active brake - Active brake stops the motor after each shot, preventing spring compression or in case of replicas with a high rate of fire, overspin (double shot problem). Precocking - Fast trigger response can be a matter of victory or defeat, especially in CQB situations. With precocking enabled, the piston will remain in the rear position after each shot with the spring already compressed, ensuring that the next shot will be fired immediately after you pull the trigger. To release the spring after using precocking, pull the trigger and hold it for 2 seconds, after which a second shot will be fired, this time with no precocking and fully braked. Binary trigger - Allows for easy double shots in semi-automatic setting. After enabling this mode, if semi-automatic fire is set, shots will be fired not only when the trigger is pulled, but also when it is released. Rate of fire reduction - Reduce the rate of fire in automatic or burst fire to save ammo or make the replica shoot in a more realistic fashion. DMR mode - Introduces intervals between semiautomatic shots to comply with DMR rules on some fields. Low battery voltage alarm - Dedicated for Li-Po and Li-Ion batteries. When the battery voltage fall to a dangerously low level, the user will be notified by short sound signals that are repeated every minute. This may also be freely switched on and off. Diagnostic system - Constantly monitors the replica and the mosfet itself. In case of any problems, immediately lets you know what it might be, making troubleshooting much easier. Electronic fuse - Will save your replica and battery in case of a major malfunction. It will automatically disconnect the battery if a short circuit or blocked motor is detected. Programming of all the settings is done solely by using quick and easily memorable sequences of fire selector switching and trigger pulls supported by sound signals and multicolor LED diode. That allows changing the settings at any moment, in a matter of seconds, even under enemy fire. All settings are set independently for each selector position, so you can program the mosfet exactly the way you want, for example, semi on semi and binary trigger on auto. ETU++ works without problems with any battery from 7V to 17V. It can also be used with most extreme setups, without any limitations as to the spring rating. The maximum rate of fire is 50 RPS.

G&G Armament GC16 Warthog 7'' FULL METAL Totally Stock Only been used for 1 x CQB day Lovely bit of kit but now using HPA setups only. £200 Located Oxford Can Post at buyers expense Other Features: Full Metal Design High Attention to Detail Electronic Trigger, MOSFET and Fuse System MOSFET features a 3rnd Burst System Ambidextrous Magazine Release Ambidextrous Fire Select Polymer Hop Up unit 14mm CCW Flash Hider thread Finger Ridged, none-slip rubber, magazine design Keymod Rail System Full Length 20mm RIS / RAS top Rail for Sights and Scopes Removable Front and Rear Flip-Up Ironsight Mock Forward Assist and Bolt Release Ambidextrous Rear Sling Plate Mock Gas Block and Tube Six Position Stock Unique Butt Stock Design Rubberised Rotating Butt Stock Plate Locking Mechanism to hold the stock in position Textured Cheek Rest Flip-Down Battery Storage Compartment for CR123A Battery Package Includes: GC16 Warthog Combat Machine Magazine User Manual

ASG CZ Scorpion EVO 3 A1 - Full Evotek Upgraged by JD Airsoft 2019 Hand Stop 1 Bag 3 Mid Caps 2 High Caps HB Ind 3d Printed Handguard 330fps on 0.2s Rate of fire is a massive 28rps!! Located in Oxford Price is £425 This is a truely epic bit of kit and the only reason for selling is I have gone full darkside and now just run HPA MTW's! Upgrade package includes: Ultimate Gear Set High Speed 100-130 (16:1) (Short Stroked) Ultimate Piston Polycarbonate M170 Red Ultimate Cylinder head, aluminium, ver. 2 Ultimate Piston head,aluminium,ventilation,hexachrome black ASG Scorpion EVO Steel Spring Guide with Bearing Ultimate 8mm Ceramic Bearings Ultimate Motor, CNC 30K , short axle CNC short-stroke trigger (Black or Silver) Madbull Precision 7075 6.01mm tight barrel Prometheus Purple Hop Rubber with Flat Hop Mod ASG ULTIMATE Mil-spec AEG Spring / M115 - YELLOW (FPS now @ 330FPS New 2018 Revision Gearbox case fitted

Electric Winding Drum Mag Runs on AAA batteries Has a press and hold pressure switch (has tape over it as its split and I put it back together) Works 100% Just need some velcro to attach it to your gun £25 Inc P&P and Charges

Tokyo Marui MP5K High Cycle 1 high cap 4 mid caps silencer adapter 1 battery Been used a couple of times. Great little side arm for DMR or for CQB Totally Stock with all the TM Fairy Dust still inside!!! Located in Oxford £200

G&G SR25 / GR25 Single Shot DMR with Titan Gate 450fps on 0.2 380fps on 0.28 Description: SR25/GR25 with Supressor (RRP£400) Nuprol ZR10 1.25-5x26 Sight (RRP £100) Madbull Tightbore Barrel (RRP £30) Maple Leaf Macron Hop (RRP £8) Titan Gate Advanced on Deans (RRP £130) Axe Stock and Buffer (RRP £30) Big Dragon Grip (RRP £15) Bipod (RRP £20) G&G High Cap x 2 (RRP £40) G&G Mid Cap x 2 (RRP £30) G&G Low Cap Nuprol Pick & Pluck XL Case (RRP £100) Original Box / Barrel / Trigger / Stock Total Value RRP £900'ish ++ Options £400 All above but on orignal stock, no scope and no case £420 All above with no scope and no case £460 All above with no case £460 All above with no scope £520 for EVERYTHING Located near Oxford Lovely RIF and get lots of attention and kills! Only selling as looking to fund a HPA Setup MTW Wolverine

2 x Hi Capa Mags (Gas Tight) Unknown Brand Got it a bundle of stuff and dont have a HiCapa to test, so not sure what they fit £25 Inc Fees & P&P