RobHedley

Wow @Bada Bing!!! Almost TM MWS royalty along with @Davegolf and @Wolf1. @Bada Bing your videos, along with this thread, convinced me to get the MWS and now I am onto my second....... wait..... should I be thanking you..... I have less money now..... 👍

Part way through the John Wick / Taran Tactical TR1 Build. The upper is fully built but the eagle eyed among you will have clocked the lower is empty, no trigger etc. I have sat it next to my CQB MWS for size comparison. Just need to sort the scope out and I then have all the parts I need. I looked at a Trijicon Accupoint the same as the Tarran TR1 comes with but at over £1000 to fit it into a toy gun, I think I will find a slightly cheaper version!!

I love the Japanese - English translations they have on the bottom left of the display. “The gun maker carrying out extreme sensitivity” WTF does that mean?? 😂😂😂 looks cool though!!

Well I have a nice project to work on!! A while ago I bought the front end of the Angry Gun John Wick conversion for the TM MWS off a forum member that had bought the full set to replace his upper that he broke. I had every intention of buying another TM MWS to build it into a DMR but never got round to it. Well about a week ago, I received an email from him stating he was giving up Airsoft and did I want to buy the rest of the JW kit plus the donor MWS. Well I jumped at the chance. For the same price of a new MWS I got an unused MWS, the John Wick/Tarran Tactical kit, Prometheus Barrel, TM Tracer Unit plus extras such as SixG Nub, Modify Tan bucking, tools etc. I am going to build it into a DMR that mirrors the Tarran Tactical TR1. As can be seen it is essentially in kit form so I will be l learning a lot more about the inner workings of the MWS in intimate detail!! At least I have my other MWS to use as a reference 😳

Most definitely buddy. Sorry to see you leave Airsoft. Hopefully we will see you back here soon.

Well I have a nice project to work on!! As per my post a while ago I bought the front end of the Angry Gun John Wick conversion set that @LVOA-D had bought to replace his upper that he broke. Well about a week ago, I received an email from him stating he was giving up Airsoft and did I want to buy the rest of the kit plus the donor MWS. Well I jumped at the chance. For the same price of a new MWS I got an unused MWS, the John Wick/Tarran Tactical kit, Prometheus Barrel, TM Tracer Unit plus extras such as SixG Nub, Modify Tan bucking, tools etc. I am going to build it into a DMR. As can be seen it is essentially in kit form so I will be l learning a lot about the inner workings of the MWS in intimate detail!! At least I have my other MWS to use as a reference 😳

I have the Hurricane (WarMag) speed loader an I know what you mean. Mine hasn't broken yet but it feels like it is about to every time you use it. They supply you with 2 winding handles when it arrives which shows they must have problems with them snapping. My one bit of advice is instead of windong it with the handle itself, I grab the middle part of the winder mech like a dial and push it round with my thumb as low as possible on the winding handle. I assume that is what broke on yours @Yukarin? I may look at getting the TM Speedloader XL although I have to say the tube and plunger supplied do actually work.

............. well thats good then!! 🤣🤣

Are you looking for the inner and outer Barrel and the hand guard etc? I have an TM inner barrel (I have 2 in fact) and a hand guard plus fittings. I can't help you with the outer though.

Oops, a bit of finger trouble with the typing. I mean't I couldn't find a PTS ring in stock anywhere apart from in Honk Kong last time. However that was about 2 - 3 months ago that I looked.

@itsme Not 100% sure but the lip on the outer barrel does look wider that the TM original from memory. Hopefully it won't as I struggled to find anywhere with stock last of the PTS Ring last time I looked.

On another note, I am now the proud recipient of rest of the John Wick Conversion kit that @LVOA-D bought for the upper and lower receiver. Top guy and completely painless transaction. If only all purchases were like this! I will be getting a second MWS and building a DMR with this front end. Cannot wait to start the build. The John Wick AR-15 is actually a Taran Tactical TR-1 Ultralight and plan to build it the same. I have already priced up the BCM Stock, Pistol Grip and foregrip through Brownells!!! What is happening to me!!! Luckily I saw sense when I priced up the same Trijicon Accupoint Scope and it was $1,399 before tax, shipping and import!! I will be getting something different!! At least I haven’t completely lost it!!

I second Dave here. i used BLS Ultimate Heavy 0.4 and about 1 in 5 just split apart as it came out of the end of the barrel. Also left a white residue on my mags, bucking and inner barrel. It may just be this batch or this brand but I wasn't impressed.

Yes, so far. It was on an AEG before the MWS and has only been skirmished 3 times on the MWS but so far I haven’t had to tweak it.

Glad to hear after all your problems you still love the MWS. I was looking at getting an ACOG with the doctor sight on it.... I take it you wouldn’t recommend an Airsoft spec one for the MWS? Sight wise I have the Element Holosight (https://www.combatsouth.co.uk/collections/scopes-accessories/products/element-aim-o-551-red-green-dot-black) for £40. Not had a problem with it so far. Regarding tips for the green gas mod, the hardest part is getting the spring back in. I used a wooden kebab Skewer (basically a long thin wooden stick) and after sliding the first part of the spring back into the follower track, I slid the Skewer down the middle of the spring and into the spring track. Then push the spring down the Skewer back in to the mag. Then use your thumb and hold it in place, leaving about 5 turns sticking out. Remove the stick and put the spring guide onto the end. Line up the base plate to get the square base of the spring guide in its slot and press down. Secure with the screws and you are done 👍. I also used the Wooden Skewer to measure down inside the tube down to the top of the valve to make sure I wasn’t going to catch it. I cut my silver tube 1mm above the top of the valve. I put the Skewer down to the top of the valve and makes with a pen so I knew where the top of the valve started and marked it on the outside. Add 1mm up from that mark and cut it with a pipe cutter. hope that helps

Oh, yes I see what you were talking about now. Definitely staying away from Bio's now as a number of them split when shooting them and gunked up my mag and barrel. As @Davegolf said, they are just too soft for the MWS.

I run tracers most Wednesdays in the World War 2 Tunnels down in Portsmouth and never had a problem. I have the ASG B&T Tracer unit with Madbull .2 Tracers and it works perfectly. @Wo1f I was looking at getting some Geoff's tracers as they come in heavier weights. Although down in the tunnels, with no wind etc and short engagement distances .2s are more than adequate.

@itsme Not wanting to answer for @Wo1f as he is the originator and a huge font of knowledge but I can't see how it could cut the bucking. The edges are not severe enough and the distance the bucking will push into the concave is not enough to cause damage. Just my opinion of course. On another note, having changed my barrel from standard to an Olga 6.05 250mm with the Modify Tan bucking and SixG super nub. I was wondering how it would increase my FPS. Having been cronoed the previous week at UCAP The Bunker using Abbey Vortex with .2 tracers at 270 FPS. Back at The Bunker on Wednesday using the same gas and the same .2 tracers it is now coming out as 300 fps with a deviation of 2 fps either way over 10 shots. Very consistent. One moment of note, I was guarding an objective and aiming down a long tunnel. We could see the enemy creeping along in the dark. One of my team mates stated "Don't fire yet as you wont reach them". Basically he had just shot and reached about half way (He had spent 5 minutes listing all the upgrades he had fitted whilst in game!). Like a red rag to a bull, I took aim and fired a single tracer round, it rocketed down the tunnel with no deviation, sailed past the point matey boy's AEG shot dropped to the floor and cracked the lead guy in the chest plate. "Hit"... and the rest of the tangos scurried off into the darkness. Followed by a "Hmmm, wow" from the guy behind me. He collared me in the safe zone asking question after question. We may have another convert.

Cheers @Davegolf I will switch back to normal BBs. Gas wise I have a full can of Guarder Power Up Gas that I could use. I will be playing in the Tunnels down in Portsmouth on Wednesday which can be pretty cold. My MWS was chronoing on the Abbey Vortex Gas at 270 fps so there is a bit of movement available. Hopefully the new barrel and the stronger gas won't push it over 350 fps?

@itsme I didn't have to replace the barrel as yes it would have fitted on the original. I wanted to fit a tighter bore to try and increase the FPS a little as it was running at around 270 fps. Damn @LVOA-D, that makes my £8 gas block look completely crap!!! Looking good!!!!!

Upgrade time!! I ran the CQBR totally stock on Wednesday at the Bunker in Portsmouth. Ran faultlessly and was shooting like a laser on .20 tracers. Crono’d At 270 FPS on Abbey Vertex gas. Having already bought a Modify Tan Bucking and a SixG Super Nub, I wanted to fit them so I ordered an Orca 6.05 250mm Barrel. I have to say props to The Cage Airsoft. I order the barrel Friday early afternoon and it was in my hands Saturday morning with standard delivery!! Got round to fitting the parts on Sunday. I started off getting a bench mark by firing .25 bb’s. I did some video but you can’t really see the bb’s flying so pretty pointless! They were reaching out to about 50m maybe a little shorter. Stripped the MWS and fitted the parts. Pretty simple despite it being the first time I have ever done anything like this before. Loaded the mag up with .4 bb’s and after a little bit of hop adjustment they were flying straight and true. Judging by eye the .4s are still motoring some when they pass the point at which the pre change .25 bb’s drop down. Very impressed! 2 things of note, I had to put the hop up fully on to get the .4 bb’s to fly straight. Is this correct? As in are .4’s the heaviest you can fire? Also I was using BLS Ultimate Heavy .4 Bio BBs (got them from Camoraids when I purchased the rifle). A few of the bbs split as they came out of the end of the barrel and I noticed that the magazine follower had a white line on it with what looked like bb residue. Having never used bio bbs is this normal??

Cool, sounds good. They are exactly the parts I was after!! I look forwards to hearing from you. 👍 You may have an addictive personality but you will end up with the coolest toy!!!

@LVOA-D You are a braver man than I am and I used to race Cars at nearly 200mph! If you are going to sell the bits you don’t need then I would be interested in the Rail/Outer Barrel etc. 😜

@LVOA-D Is it not worth contacting Angry Gun direct and seeing if you can just purchase the John Wick Upper on its own?? You never know, you got a 15% discount! Maybe suggest that they sell the whole thing as separate bits of kit as it is more than the price of 1 1/2 MWS if bought here in the UK. They may get more sales if people can buy it in stages.

Of course, its international you don't pay VAT. My excuse is that it was early and I was sat at my desk pre coffee!!☕