Jump to content

BenJackson

Members
 View Profile  See their activity

  • Posts

    84

  • Joined

  • Last visited

  • Days Won

    2

  • Feedback

    100%

 Content Type 

Everything posted by BenJackson

  1. BenJackson
    Airsoft guns are not "air weapons" under the Section 57A. This changes when we breach the "lethal" power limits as described. If this is a bolt action gun then this becomes an air rifle by legal definition, which unless you're in Scotland, won't get you in any hot water for ownership, but a site would be screwed if somebody complained of an injury and it was discovered you were over the limits and had technically injured them with an air rifle. The same can be said for fully automatic airsoft guns, although once these surpass the specified limit, they become Section 5 firearms, meaning there's no legal variation between your airsoft gun, and a completely bog standard real M240B. As already stated, the UK firearms law is incredibly poorly written, with far too many overlaps and grey areas.
  2. BenJackson

    Time Left: 2 days and 9 hours

    • For sale
    • As new

    Bought this around a month or so ago, realistically I won't be building the whole thing any time soon so looking to sell and revisit again another time. It has only ever been taken out of its external packaging once. Its still sealed in the cellophane wrapper, so is in "as new" condition. £335 to your door.

    £335

    - GB

  3. BenJackson
    SD FULL metal real good
  4. BenJackson
    Swap you a JG MP5 and £200? All it's worth
  5. BenJackson
    I've got an ACM M500 for you if it's any good? 👍
  6. BenJackson

    This advert is COMPLETED!

    • For sale
    • Used

    Available to order, now on the way from Japan once again... Tanaka SAA Jupiter Finish, Civilian 4" version. The best finish from the vest manufacturer of airsoft revolvers. Long since sold out in UK stores. £325 to your door

    £325

    - GB

  7. BenJackson

    This advert is COMPLETED!

    • For sale
    • Used

    Available to order, now on the way from Japan once again... Tanaka SAA Case Hardened Custom Finish. This is the non-detachable cylinder model, which boasts a higher muzzle velocity and increased "magazine" capacity over the Detachable Cylinder models. £245 to your door.

    £245

    - GB

  8. BenJackson
    I can source a Maruzen M1100 for you if you'd like? Gas operated GBB shell ejecting shotgun
  9. BenJackson

    This advert is COMPLETED!

    • For sale
    • Used

    KTW Flintlock Carbine on the way from Japan. Very rare and long since discontinued. Fully functional, in generally good condition with a few marks as shown. £525 to your door (There's a lead time of 4 - 6 weeks on this item, depending on how long customs drag their feet) Happy to provide vouches / credentials from previous customers if need be, I run Raresoft 🙂

    £525

    - GB

  10. BenJackson
    @NovaByte I've just realised it was you who replied to my post on Zero In! I've just sourced another gorgeous SAA for @Jay851. I run Raresoft and do this thing regularly. If you want an SAA, send me a PM and we can discuss. You can choose (almost) whatever model and finish you want and I should be able to get it. The only thing is it'll take around 4 - 6 weeks to get here, but you're in safe hands 🙂
  11. BenJackson
    @Tackle I think from the looks of that post, OP is the one who's asking if something from 5 years ago is still available! Out of curiosity, why a King Arms and not a Tanaka?
  12. BenJackson

    Tanaka K98

    BenJackson posted an advert in Gas Rifles

    This advert is COMPLETED!

    • For sale or swap
    • Used

    Boxed Tanaka K98K in need of a little TLC Outer barrel is loose (they were only ever secured by glue and its old) so I've secured it with an o-ring for now. That and next to the flathead screw on the last photo, there's an ever so slight burr which is stopping the bolt from being removed from the gun, just wants sanding/filing down. The rifle however is fully functional and there's not a single mark on the stock. It's a lovely BNZ "G" version, meaning the fps can be adjusted by the use of restrictor discs. Looking for around £300, open to offers or other GBB trades.

    £300

    - GB

  13. BenJackson
    @Tackle Unless it's me 😁 @Blaze I can get you one buddy. They're much more expensive than a standard TM Spas 12 but I'm sure you know that already.
  14. BenJackson
    Would you split any of the mags dude?
  15. BenJackson

    This advert is COMPLETED!

    • For sale
    • Used

    These are arguably the prettiest and most desirable of all Resi pistols, and as such command the highest price. These are very hard to get hold of, more so than any of the revolvers or the TM lugers. £650 to your door. Also open to trades and part exchanges on GBBRs etc

    £650

    - GB

  16. BenJackson
    It's Raresoft time
  17. BenJackson

    This advert is COMPLETED!

    • For sale
    • As new

    On the way from Japan is this MGC P7M13 GBB. Its no hi capa in performance, these predate the days of hop, but it replicates the grip safety function of the real P7 perfectly, and is still better constructed than the vast majority of airsoft pistols even today. It is dimensionally the exact same as the real version, and so is the weight. It comes with full trademarks too.

    £270

  18. BenJackson

    This advert is COMPLETED!

    • For sale
    • Used

    On the way from Japan is this lovely Tanaka Umbrella Magnum 8" Version. In great condition, complete with all accessories as seen, even including the muzzle cap.

    £375

    - GB

  19. BenJackson

    THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • For sale
    • Used

    Will soon have another Sheriff XM177E2 that's set up for low pressure, so this one is surplus to requirements. The Sheriff uses a modified Asahi BV unit and is built into a Marushin PFC receiver with fantastic roll marks, and is fully functional, awesome range as to be expected with factory LRB (Long Range Barrel). This will easily compete with and outperform upgraded AEGs in terms of range, which isn't bad for something that's 30 years old without a hop unit. Ideal weight between .28 - .32.These do not have an adjustable hop, and need to be "tuned" depending on PSI and weight used. Due to the technology, these are also full auto only, so no CQB with this one. Magazines are air fed, you'll never have to worry about replacement springs or feed lips, and the magazines are steel and constructed with the same quality as genuine stanags. I will install and supply a spare 5.85 x 1.9 shore 70/80 hardness o-ring before shipment, that's the only serviceable part in this gun. Happy to provide a shooting and operational video for anyone interested. - JAC 3 x 20 scope not included - UNCLE special 20rd mag not included - Will by supplied with a standard 30rd type magazine, more available at extra cost £695 including UK postage, happy to deliver myself for the cost of fuel. Open to shipping overseas

    £695

  20. BenJackson
    Ignore half the kit because it'll likely be ITAR restricted. In terms of actual RIFs...why do you think you can't bring them here?
  21. BenJackson

    GBBR G28

    BenJackson commented on GBBRLOVR's advert in Gas Rifles

    If you're after one buddy, send me a message and I'll see what I can do. I run Raresoft, currently have two GHK Grozas on the way, a HWS M2019 Revolver from Blade Runner and a couple of other bits and bobs 🙂
  22. BenJackson
    It's only twice a year, but take a look at the Midlands Airsoft Fair. It's a fantastic event with a lot of variety
  23. BenJackson

    This advert is COMPLETED!

    • For sale
    • Used

    Currently flying somewhere over the Atlantic and available to order is this boxed MGC Calico. This is a NBB gun with a gas tank stored in the pistol grip, which is good for hundreds of shots without the need to refill, it's incredibly efficient. The replica is fed via a large hopper system, simply unscrew the cap at the top, and pour in over 500 bbs and you're good to go. Don't expect a MK23, but a fun plinker and people have been known to add modern hops to these... £195 to your door.

    £195

  24. BenJackson

    This advert is COMPLETED!

    • For sale
    • As new

    Up for grabs on the way from Japan is this lovely Tanaka K98K. Its in as new condition, which is impressive considering these haven't been made in a very long time. They're also considered to be the nicest quality K98Ks out of the box. These take the standard Tanaka/KJW M700 magazines, and due to being gas, can be cycled very quickly, perfect for closer range engagements in its current form. £445 posted to your door within the UK 🙂

    £445

  25. BenJackson

    Asahi Super FNC

    BenJackson posted an advert in HPA

    THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • For sale
    • Used

    For sale is my very rare Asahi Super FNC. Reason for sale is I have a good few BV guns and realistically this one is never going to get used....and I want to replace its position on the rack with something else. This airsoft gun is from the late 1980s, and is the last iteration of the Asahi FNC. Its also one of the few bullet valve guns with a functioning select fire mechanism. Construction is steel and resin. Its no Inokatsu, but it's no plastic fantastic marui either. Ideally wherever is looking at this is interested in old bullet valve guns, or already collects airsoft guns from the classic era (Asahi, JAC etc). I want it to go to a good home. Knowledge of BV systems will be needed to service and maintain the gun, these systems are not like anything else on the market. I will include one magazine, the rest I will need for my other replicas. Condition is untested, please consider this a wallhanger unless you're already familiar with BV systems. These were also used in Japan for AEG conversions once upon a time. Please feel free to ask me any questions 🙂

    £345

    - GB

×
×
  • Create New...