Jump to content

Funnyhat29

Members
  • Content Count

    17
  • Joined

  • Last visited

  • Feedback

    N/A

About Funnyhat29

  • Rank
    AF-UK Newbie

Profile Information

  • Guns
    cm16
    TM high capa 4.3
  • Gender
    Male

Recent Profile Visitors

970 profile views
  1. That was another question I had, I was thinking of making the jump to lipo, I am not too scared of wiring a mosfet into the gearbox, and I know a 7.4V lipo on stock motor should be fine, and 11.1V would probably lead to the quick death of my standard gears. Will a 7.4V see a good increase in rps? or will it be barely noticeable, I normally play semi only though so it's the trigger response I am mainly interested in.
  2. Hi, thanks for the replies, I was thinking of doing a piston upgrade later down the line so may look at that later on in my slow upgrade process, I think I will stick with an m90 spring, as this will definitley lower fps, and if after all the other upgrades (hop up and spring guide) I find my fps is too low, I can always get another spring or cut my current one.
  3. Hey, So a few years back I bought my first airsoft rifle, a cm16 raider, because who doesn't? I have already internally and externally upgraded it. Currently it has 363mm 6.03 tbb internally. This put me originally on 348 fps, however since it hasn't been used as much, the fps has been seen to be nearly 360 fps, and due to laws I have obviously taken this apart and am needing to downgrade it, ideally I would like to hit 330fps as this keeps me safely under 350fps and means I can play at most cqb sites. I am wishing to upgrade my hop-up unit to a flat hop system, this will presumably change fps, and I am going to need to change my spring and I thought I may as well do spring guide whilst I am in there. So my question is what spring should I go for? Ideally I don't want to go over 350fps at any point, and the over time I know the spring will settle, getting under 330fps is not a must but it is a wish. I was looking at an sp90 spring by guarder or possibly an m100 non-linear spring and maybe cutting it if need be. Which one should I go for? considering possible fps changes due to spring guides and hop up. I know this is a waffley post but any discussion or advice is very much appreciated Richard
  4. yeah, hopefully it looks good when it all comes together
  5. i found this outer barrel http://www.davescustomairsoft.co.uk/External-Parts/barrel-block-tube?product_id=1219, not too bad, i assume this will fit to my receiver, £27 for the rail and a cheap suppressor for £10, £12 for some magpul flips, may treat my self to some rail covers as well
  6. it's not the length, although a longer barrel would be nicer, it's just making it look different, make it my own instead of a stock gun
  7. any idea where to get an outer barrel for? i know most barrels will be compatible with the receiver
  8. Hi all, I have a g&g cm16 raider short, satisfied with the internals at the moment and am looking to upgrade it externally, my preferred build would be a 10" outer barrel with a flash suppressor and a 10" free float rail, i have found some parts already, just wanted some advice/alternatives that you guys suggest Can't seem to find any decent priced outer barrels in the uk....so any pointers there would be good, i found this for the rail: http://www.ebay.co.uk/itm/221904092774?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT any advice/feedback is appreciated
×
×
  • Create New...