Tabitha

I've put a new trigger spring in and double checked everything is as it should be . . . the reset sadly is still not kicking in like it should. If I use the decocker then the trigger resets nicely but when I depress the trigger on a cocked hammer it doesn't complete its reset. She's still a beautiful piece and I'm still pleased at how she's come together. I've finished tailoring the wood grips and they're now done. Sights are Nitrite and the only plastic pieces are the odd ones that have to be. For some reason I look at her and see / think Resident Evil 4 / Revelations / Leon S Kennedy. If it even exists, I am thinking a longer, extended magazine, a red / green dot sight in the guide rod . . Right now though, I think it's time for a coffee. 😄

Sorry for the delay in replying. Having the magazine in or out does not effect the reset sadly. I'll hit more than the obvious spots with lube and follow her movements carefully to see any pressure points where she might be catching / meeting resistance. Thanks for the help. Will update once it's done. 😸

Good morning. I'm hoping that someone will know / see something I haven't as to my trigger reset issue. (I've attached two videos and a photo to aid in illustrating the issue). Put plainly, the trigger doesn't reset / go back to its fully forward, reset position after it is pulled. I've taken my standard, factory basic, TM P226 gas and used it as my project piece (I'm unwell and part of my treatment includes keeping sane using specialised projects). I've basically created a specialised model of the Sig P226, the Naval Spec Ops m odel. I've had her apart and gone over everything with a careful eyen Good morning. I'm hoping that someone will know / see something I haven't as to my trigger reset issue. (I've attached two videos and a photo to aid in illustrating the issue). Put plainly, the trigger doesn't reset / go back to its fully forward, reset position after it is pulled. I've taken my standard, factory basic, TM P226 gas and used it as my project piece (I'm unwell and part of my treatment includes keeping sane using specialised projects). I've basically created a specialised model o,f the P226, namely the Naval model, the Sig P226 (NAVY). I've had her apart and rebuilt her several times and this issue with the sluggish, non fully resetting tv. Her baby 20210402_183743_1.mp4 20210402_183512_1.mp4

Good morning guys. I've hit a wall concerning Mt locating of 3 internal parts for the TM DETONICS. I've included with this request an image of the official blown-apart diagram for the TM DET' with the TM part numbers and the individual parts highlighted for ease of identification. I can't locate any listing for the parts, be it official sellers, companies in the UK and globally, the manufacturers sites, etc. I've gone through the actual private Guarder online companys sites' parts database but still nothing. The only way that I can obtain the items is by purchasing an actual Detonics pistol just for these 3 parts and that's just crazy. Am I missing something obvious? Any help you can offer is hugely welcomed. Kindly, Tabi & Willow.

OK. Donor ordered. 😺

Hi guys and girls. I'll try an keep this brief. This coming Saturday (13th Feb) is going to be my birthday. It's not a standard age though. It's a very big, significant one and it's not joyous for me. (Born in 1981) Because of this, I want to put together a sidearm that means something very personal to me. A Sig Sauer P226. I own a real steel SIG SP2022 chambered in 9mm. I wasn't able to receive a P226 at the time but I was able to request and purchase my 2022. What I'm looking to do is take one of Guarders' P226 metal frame and slide pairs and then use a TM P226 as a donor. My question is, given I will need a full P226 for a donor, would you suggest I simply purchase a TM P226 outright or is there a 'bin' of boneyard/parts that someone knows of or even a TM P226, working or broken that a member possesses that they would be willing/happy to purchase from them? Thank you for patience reading my request. (I've added a couple pictures of my SP2022 for anyone that's interested in SIGs first polymer framed pistol.)

Trying to find just what the heck that thing was all about, if it was a Eastern European comedy skit or a Ukrainian jack ass type deal or what, but, the dodgy midget playing with his dolls in the second pic looks disturbingly like my naked runner. Same kind of nut bag look. Still looking but it's 7am and I haven't slept yet (had surgery on Monday) so will go hunting again after meds and sleep. lol. Not the same but 'of the same flavor' I think . . 😱

. . . *cough* . . Marathon . . *cough* . . For some reason I didn't get beeped automatically to let me know that anyone had replied to my pondering . . let alone THIS many people!, so sorry that it looks like I've just dropped a naked midget in boots with a roadflare up his jax'ee on you guys and done a runner. I'm looking g for the name of the show, the clip WITH pictures, etc, or anything I can. I know it was up in the Sky numbers, maybe VICE or DMAX or BLAZE, BET:BlackEntTV, Hi-Impact TV, YANGA . . They're all weird as fook at 3am, lol.

Something has been running through my mind for about a month since I saw a picture late at night from a Russian TV show / advert / news story? Basically, what I saw was what appeared to be a 15 x 15 man skirmish in a large internal and external demolished factory / hospital lab complex / series of large buildings like a campus. They were all kitted out in light camo gear and had decent looking equipment in terms of firepower. Now . . there isn't any other way for me to describe what went down but to just say it . . One of the teams had a male midget, almost 100% naked apart bua pair of boots, wearing only boots, run out of cover, run directly across the main 'coming together' open area, carrying a MASSIVE mini gun slung over his shoulder and what I think was a lit road flare/ firework sticking out of his butt. (its damn near smoked out gbf e). As best as I could tell, the naked midget was a decoy for one of the teams. Was it ethical to have a midget run around naked with a road flare wedged between his buttocks, as a distraction for the other side?

A question for anyone that knows about building from a frame upwards, or for anyone that’s just plain smarter than I am. I have a new metal Guarder Desert Warrior 4.3 frame and slide. ( To help, I found my frame and slide on one of our UK airsoft company sites. This is what I have.) https://www.fire-support.co.uk/product/guarder-aluminium-slide--frame-marui-desert-warrior-43-tan I thought that I had a good selection of spare parts from various TM 1911 MEU takedowns that I can use already but sadly only 2 of the spare parts I have actually fit. (A trigger and some Pachmayr grips, lol!!). My question is this; Before I start ordering all the internals for the slide and the frame, 😖, WHAT am I looking for in the parts description please? The slide is too short for the MEU outer and inner barrels I have so . . Do I search for parts that state 'Will fit TM model ? . . . ?' I have asked my usual online airsoft parts company but they've said that their 'gun guy' isn't likely to be in until about Wednesday next week. Thanks for any help you can offer. Kindly Tabi.

👍

I apologise for adding to this particular conversstion topic thread. I normally don't comment on matters involving non-domestic company shipping / sales policies as I don't normally have any specific information that other, more experienced members, wouldn't normally have and would have already contributed, but on this occasion, on this specific date, I do. As of just over 12 hours ago, the, until 24hrs ago, previously separate governed entity state, City of Hong Kong, has just come under a new security ruling that, amongst other security/policing/legal oversights, (including as of 12hrs ago, international sales and customs using businesses), are now subject to the laws and regulations of the ruling party of mainland China. The domestic news, here in England I mean, are primarily focusing on the parts of the changes involving the Communist Party's ability to arrest, charge and imprison any resident of Hong Kong that they deem have/might have at some point in the past AND possibly in the future, a 'negative impact' to themselves, but the newly created and modified laws mean that all companies based in and around the Hong Kong area that EXPORT goods of a higher value are now required to follow set regulations of the ruling party of the mainland. I don't know how this will effect your goods coming out of China but the company itself, if based in Hong Kong, just got a serious delay to the paperwork processing at customs for outwards headed goods. I'll phrase this carefully . . . All f×××ing hell has just been dropped on both the people residing in Hong Kong and the businesses operating out of it. I'm sorry if all of that seems very odd in comparison to my usual postings. There isn't any joviality in this one posting from me this time.

I misread the title . . I thought it said; Do People Take Muslims too seriously 😳 That was scary!