V2 RetroArms Gearbox, fully assembled with GATE TITAN + Motor + 3 x 11.1v Batteries
V2 RetroArms Gearbox, fully assembled with GATE TITAN + Motor + 3 x 11.1v Batteries
- 130.00 GBP FOR SALE
-
Offered by:
Shizbazki
- (
- )
- This advert is COMPLETED!
-
Specs
- Item Condition USED
- Quantity 1
Description
Accessory/Make: V2 RetroArms Gearbox, fully assembled with GATE TITAN + Motor + 3 x 11.1v Batteries
Condition: Used
Splits/Swaps/Part Exchange: No x 3
Price/Payment: £130
Location: Luton Area
For sale is a completely built, high end V2, no expenses spared gearbox.
All parts were purchased from reputable Airsoft vendors circa Jan 2018, so no dodgy clone parts.
Bought to create a high end no expenses spared AEG gearbox to be fitted in a G&P SAI M4 receiver to compliment a highly accurate HPA version of the same gun, basically I could change the guns inner workings by just swapping the lowers from HPA to AEG should I play at a “no HPA” site.
This never materialised much, the gearbox was used at probably two game days as the HPA was (IMO) a preferred platform.
Using a .25g BBs fired through a 370mm, 6.01mm EdGI barrel I was getting consistent FPSs between 308.5 to 309.2 FPS, under the 310FPS limit of .25g BBs.
I will list the parts below as best as I can looking at old orders from my emails.
Gearbox Shell: RetroArms CNC’d 8mm V2 Gearbox
Bushings/Bearings: Modify 8mm Ceramic bearings
Motor: ASG Infinity U-22000 Silver Motor with Long Shaft
Gears: SHS 16:1 ratio set
Anti-Reversal Latch: SHS ARL
Main Spring: Cant remember the brand, it was also probably a M105 or M110 spring
Spring Guide: Cant remember the brand, might be a RetroArms one.
Gearbox Cylinder: G&G or G&P I think
Cylinder Head: I think this was a RetroArms but don’t quote me on that
Piston: SHS 14 toothed High Speed piston
Piston Head: G&P Explosive bearing Piston head
Tappet Plate: SHS V2 Tappet Plate
Air Nozzle: SHS M4 Air Nozzle
Selector Plate: SHS Plate
Trigger: Can’t remember the brand
Trigger Mechanism: GATE TITAN Drop In MOSFET V2 Complete Set - Rear Wired
I’ll also be including 3 x 11.1v, 1000mAh LiPO batteries as well. I may send the batteries separately so that at least you get the good bits because RM gets a bit funny with LiPOs.
GATE TITAN kit is all there, see pics, so that you can change and modify the internal settings of the gearbox.
The RetroArms website still shows the gearbox shell, so I'll list it here:
https://www.retroarms.com/cnc-gearbox/cnc-gearbox-v2-8mm-bearings-qsc
I also have for sale the SAI M4 receiver it went in should you be interested in that, contact me and maybe we can come to a deal.
Recommended Questions
There are no questions to display.