I screwed up my brand new Glock 19 almost a year ago while trying to fit a Guarder frame, by breaking the slide, ruining the Guarder frame and disfiguring the original TM frame. Yes, I know. I am a pillock.

After repeated failed attempts to get the hammer to cock with the slide on I removed all parts and decided to sell them. There is some wear to the black paint in places, but it is due only to my disassembling and reassembling the gun countless times and not from firing. It was only ever test fired. The parts fit together fine. I can cock the hammer manually and then tap the sear to release it, but only when the hammer unit is not in contact with the bbu.

The nozzle return spring from the bbu may need replacing as there is kink in it at one end, but it seems to work as intended.

Can be used as the basis of a new build or as spare parts. Come with users manual and parts diagram but no frame slide or magazine. I will put the parts in related groups in little plastic bags labelled as chassis and related items, slide internals, mag release, hammer unit, trigger and bar, etc. All pins  screws and springs are included.