Jump to content

M4 Sniper grip causing motor to jam

Ditch

By Ditch,
in Electric Guns

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Ditch Contributor

Ditch

Posted
Posted

A friend of mine recently purchased the sniper style grip for his M4, and after installing it it worked fine. He transpoted the gun to mine in his car, and when we came to test it it stopped working. We removed the motor and tested it, spinning fine, reassembled and again, not working. He's since gone home and put the original grip back on and its working fine with no problems. Any idea as to why this is happeneing?

Link to comment
Share on other sites
Hibernator Community Regular

Hibernator

Posted
Posted

The sniper grip is a slightly different length internally. You'll need to adjust the motor height. If it doesn't spin at all it's probably too high. You need to loosen the big screw on the base plate of the grip to drop the motor down until it sounds fine again. Too screechy and it's too loose.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Guest
This topic is now closed to further replies.
Go to topic listing
×
×
  • Create New...