Nickona Posted October 22, 2011 Posted October 22, 2011 Hi, okay so these are my first mid-caps and having some issues. I've been loading them using hand (don't have a speed loader yet) and only put about twenty bbs in them so far. anyway when I shoot on full auto a burst comes out and then nothing shoots, same happens on sungle shot. then when i take the mag out I can see the bbs stock in the tube with the spring not pushing them up as they're stuck in the mag. They're knig arms mids, there is also a little turny thing at the bottom, could that do anything? Thanks a lot Nick
Supporters TPI Posted October 22, 2011 Supporters Posted October 22, 2011 Lol do you think you were sent a high cap conversion by mistake? I just put a bit of lube down the spring and fill it then leave for 10 mins and comeback fire them off then do it all again.
Nickona Posted October 22, 2011 Author Posted October 22, 2011 Lol do you think you were sent a high cap conversion by mistake?I just put a bit of lube down the spring and fill it then leave for 10 mins and comeback fire them off then do it all again. yea they're not hi-caps the turny thing need a screw driver. how would i put lube down it and what type? and btw I have 5 of them
Supporters TPI Posted October 22, 2011 Supporters Posted October 22, 2011 Ah well i have ten pmags and just the stuff that you use to clean the barrel but only 2-4 drops and do it until you get a perfect feed.
Supporters Nutster Posted October 22, 2011 Supporters Posted October 22, 2011 They're king arms mids There's your problem Few drops of silicon should sort em out
Nickona Posted October 22, 2011 Author Posted October 22, 2011 okay thanks will have a look at getting some silicone
Cameron364 Posted October 22, 2011 Posted October 22, 2011 I think you can buy pure silicone oil from Halfords? Could be wrong?
Recommended Posts
Archived
This topic is now archived and is closed to further replies.