DrFumbles Posted June 25 Share Posted June 25 Hi guys, I recently picked up a second hand TM MP7 with 5 mags. One is leak free but the others all have leaks. I've tried using a silicone lube on the o rings to no effect. I've replaced the o rings with new ones and I still have leaks. I read online about using a silicone gasket maker so I've tried that on one magazine and let it cure over 24 hours, tried refilling with gas and it still leaks. I'm kind of at a loss on how to salvage/repair these magazines. Any help or advice would be appreciated Link to comment Share on other sites More sharing options...
BigStew Posted June 25 Share Posted June 25 It could be the valves then selves need rebuilt or if the guns been run on green gas they may be damaged and needs to be replaced. Link to comment Share on other sites More sharing options...
Rory Posted 8 hours ago Share Posted 8 hours ago Sorry,bit late but just seen this. Is the leak from the port or the threads? I have had lots of success (luck) with gbb mags by soaking valves/exhausts in mineral oil (rockshox mtb suspension fluid) and then using PTFE tape on the threads when reassembling. Also try soaking the o rings in silicone oil or similar overnight before installing Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now