Krytac spr hpa conversion kit

[2RIR]

Hi all, hope all is safe through the storm, I was hoping someone could tell me where I can get a hpa drop in kit for my krytac trident mk2 spr, it's been gathering dust lately and since I'm using hpa I was told there is a drop in kit for it, thanks in advance. 

[The_Lord_Poncho]

A number of options, for all budgets.... Note that unless you are very lucky, some trial and error is required for most in order to manoeuvre the gearbox about to get a good nozzle alignment with your hop unit (plenty of online guides how to do this).

 

Personally I'm a huge fan of Mancraft - they are a great company to deal with, and if my experience is universally true, have amazing aftersales. The Mancraft PDIK  will fit inside your existing gearbox (or you can buy them that come within Mancrafts own fancy gearbox), and is mechanical only - i.e. you don't need to worry about batteries and fancy electronics. this does mean it is semi auto only, but is spot on for a DMR type set up. https://shop-mancraft.com/en/pdik-hpa-conv-kits-for-aeg-rifles/195-539-mancraft-pdik-v2-gen3-hpa-engine.html#/154-gearbox_model-v2_with_gearbox_shell

 

There are lots of other options for systems that can be retrofitted to a V2 gearbox - e.g. Wolverine and Polarstar are established brands in the market, and provide full auto capability. If you are happy to go out on a bit of a limb with a new 'drop in' and budget offering (which because its new, doesn't have much feedback yet), Ares have just brought their HPA gearbox to the market too. e.g. https://highpressureairsoft.co.uk/collections/ares-engines/products/ares-conversion-v2-hpa-gearbox-set-tm-ares-amoeba-compatible . They are built around the TM standard V2 gearbox design, so, although Krytac can be a little quirky, I might suspect they would fit without too much drama. If you go down this route with the Ares box, please report back on your findings!

Edited January 24 by The_Lord_Poncho