Ron_Lancs Posted November 25 Share Posted November 25 Hello all, Nuprol delta sopmod. I’ve got some wobble on the RIS rail. I’ve tried duct and electrical tape. I’ve also searched for hidden secret screws to fix it and I’ve had no luck. Does anyone know of a way to get a solid permanent fix? I’m tempted to hit B&Q for some bolts to torque it down to the outer barrel. Any and all suggestions welcome. Thanks in advance, Ron Link to comment Share on other sites More sharing options...
JinxDuh Posted November 25 Share Posted November 25 Have you tried tightening the delta ring? Ron_Lancs 1 Link to comment Share on other sites More sharing options...
Ron_Lancs Posted November 25 Author Share Posted November 25 1 minute ago, JinxDuh said: Have you tried tightening the delta ring? Hi mate, yes delta ring is as tight as I’m willing to tightening it the AR wrench Link to comment Share on other sites More sharing options...
Daveoc33 Posted November 25 Share Posted November 25 Are you sure it's the ris rail and not a wobble between upper and lower receiver? I've had similar wobble that turned out to be receiver wobble. Some ris rails also have a tightening lever thing that allows you to tighten them to the delta ring. If there's a screw on the top of the rails that can tighten this lever. (picture from an lct ris rail with this lever) But all that aside if there's a wobble then there's space somewhere and you need to find it and remove it. Best of luck! Ron_Lancs 1 Link to comment Share on other sites More sharing options...
Ron_Lancs Posted November 25 Author Share Posted November 25 I’m certain there’s no movement from the upper as I’ve resolved that issue. Heres a video to give some context. I have a screw with a spring mounted plate however this appears to be for the front end as a pose to the delta ring. IMG_2425.mov Link to comment Share on other sites More sharing options...
Daveoc33 Posted November 25 Share Posted November 25 (edited) Are you missing the fake gas tube? The silver wire/tube that goes from the front sight to the upper receiver. The ris rail should almost grip this and that would stop the rotation potentially. Edited November 25 by Daveoc33 Ron_Lancs 1 Link to comment Share on other sites More sharing options...
Ron_Lancs Posted November 25 Author Share Posted November 25 I have it however on my replica it doesn’t secure the hand guard , if anything it only aids the front sight post from unwanted movement. Link to comment Share on other sites More sharing options...
MrTea Posted November 25 Share Posted November 25 This could be of interest to you. Ron_Lancs and ButcherBill 1 1 Link to comment Share on other sites More sharing options...
rj1986 Posted November 25 Share Posted November 25 If it really bugs me, i use something like this https://emperionstore.com/rasfix-iv-scope-riser-mount-quick-aiming-device-madbull.html Ron_Lancs 1 Link to comment Share on other sites More sharing options...
Ron_Lancs Posted November 25 Author Share Posted November 25 6 minutes ago, rj1986 said: If it really bugs me, i use something like this https://emperionstore.com/rasfix-iv-scope-riser-mount-quick-aiming-device-madbull.html Mmm it does really bug me but not £56 bug me. Cheers tho! 23 minutes ago, MrTea said: This could be of interest to you. This I like, thus begins finding that grub screw haha I’ve measured using a drill bit and it appears to be 5.5mm Link to comment Share on other sites More sharing options...
MrTea Posted November 26 Share Posted November 26 On 25/11/2024 at 15:01, Ron_Lancs said: On 25/11/2024 at 14:37, MrTea said: This could be of interest to you. This I like, thus begins finding that grub screw haha I’ve measured using a drill bit and it appears to be 5.5mm If you're still hunting for the grub screw, I tend to use Accu for random fixings I need. Here's a link to their grub screw page. Ron_Lancs 1 Link to comment Share on other sites More sharing options...
Ron_Lancs Posted December 3 Author Share Posted December 3 I got a box of them from the zon thanks tho bud. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now