G&G MGCR a little too hot on .25g BBs

[BruceOakman]

New to GBBR's and have picked up a G&G MGCR.

Long story short, after chronoing today on .25g BBs, its a little too hot. It is also a little high for most fields on .2g BBs (but won't get me a court date).

Is anyone able to tell me what I can do to get the FPS and Joules down?

Thanks.

EDIT: Should also mention I was using the Ultrair Players' Choice gas - Which now in hindsight might be contributing to the issue somewhat. Still, any advice is always appreciated.

Edited September 2, 2024 by BruceOakman

[Hudson]

What gas are you using and how much over is it?

Edited September 2, 2024 by Hudson

[BruceOakman]

Just thought of providing that information.

Admittedly, it is using the Ultrair Players' Choice gas, which I thought to double check - and it would seem that it is a little on the punchier side of gases (live and learn).

As for how far over, in terms of results, on the .25g's Lowest/Highest recorded FPS is 340.9/366.6 and Lowest/Highest Joules is subsequently 1.35J/1.56J - which is obviously not where I'd like to be.

On .2g's things are a little better Low/High FPS of 363.6/376.2 and Low/High Joules 1.23J/1.32J - Which puts it a little high for most sites I have looked at heading to (and again, obviously flouts the legal requirement).

[ButcherBill]

Fitting an Npas will help

[Cannonfodder]

My first stop would be a lower powered gas

[GiantKiwi]

6 hours ago, ButcherBill said:

Fitting an Npas will help

 

Would be, if they even existed for that. It's a low yield platform, so could be years before one exists.