Specna Arms Mag Compatibility

[C-Diddy]

I've just ordered my son a Specna Arms M4 (E03 Edge) and wondered if anyone knows what their mag compatibility is like?

 

 

 

I'm pretty sure I've seen a thread on the forum but can't seem to find it, so apologies if I'm asking for old info.

 

 

 

I use the PTS EPM mags in my TM Recoil, and like them a lot. Just wondered if the standard versions (not EPM 1) would fit and feed the Specna.

 

 

[Speedbird_666]

My son's Specna is in bits at the moment (don't leave it anywhere humid like I did - a week near a tumble drier has destroyed the previously mint paintwork with nasty white surface corrosion) otherwise I would check.

 

From what I can remember - EPMs worked fine, MAG/King Arms style plastic Mid caps were fine. Can't remember whether my KWA MS120s work (they are better value than EPMs IMO for similar performance). Lonex flash mags worked fine. I think ICS Plastic (T-Mag) Hi-Caps worked ok too.

 

YMMV though - mine is an early batch version circa 2018 (that was fucked with QA issues) - there might have been changes in production over the years

 

 

 

 

 

 

[C-Diddy]

12 hours ago, Speedbird_666 said:

My son's Specna is in bits at the moment (don't leave it anywhere humid like I did - a week near a tumble drier has destroyed the previously mint paintwork with nasty white surface corrosion) otherwise I would check.

 

From what I can remember - EPMs worked fine, MAG/King Arms style plastic Mid caps were fine. Can't remember whether my KWA MS120s work (they are better value than EPMs IMO for similar performance). Lonex flash mags worked fine. I think ICS Plastic (T-Mag) Hi-Caps worked ok too.

 

YMMV though - mine is an early batch version circa 2018 (that was fucked with QA issues) - there might have been changes in production over the years

 

 

 

 

 

 

That's good enough for me pal. I'll get some ordered. Might have a skeg for the KWA mags too.

 

Hope your lad's gun isn't beyond salvage.

[Speedbird_666]

33 minutes ago, C-Diddy said:

Hope your lad's gun isn't beyond salvage.

 

Some pitting in the metal - managed to sand out a lot of it, but it will never be a beauty queen now. The Specna paint on mine (again - early batch so may have changed) was so thin that even 0000 Grade wire wool took it off easily.

 

So - it's had a base coat of a rather fetching shade of German WW2 'Hell grau' - and will be my first attempt at dicking around with an airbrush much like the stuff that Negative Airsoft does. Just not as good obviously.

 

 

 

 

 

 

 

 

[C-Diddy]

I'm sure it'll turn out fine, and probably look even better when there are a few nicks and wear marks in the paint.

 

We'll need progress phots...