HPA for a Golden Eagle shotgun.

[Skullchewer]

HPA NEWBIE!

So, I have a Golden Eagle m870 sawn off.

I've seen that you can simply change out the fill valve for an hpa valve and you're mostly there. I've bought a Balystik HPA tap for golden eagle shotguns.

So my questions are:

Is there anything else I need to do to the internals to prep it for HPA?

What tank/regulator/line should I get?

 

I already have this tank for filling my tag shells, would this work?

https://www.bztactical.co.uk/valken-13cu-3k-air-system

 

 

Edited November 3, 2022 by Skullchewer
Typo

[Skullchewer]

Well, after a bunch of research I ordered a Balystik HPR800C V2 Regulator, Balystik Deluxe Line and a Valken V2.0 48ci 3K tank.

I think that'll all work together.

🤷🏼

[sjhirst]

yep, cant go wrong with that set up!

Just be aware, that depending on what shotgun you have, you might need to drill a wider hole for the hpa tap to go in.

[Skullchewer]

  On 04/11/2022 at 18:26, sjhirst said:

yep, cant go wrong with that set up!

Just be aware, that depending on what shotgun you have, you might need to drill a wider hole for the hpa tap to go in.

Expand  

Yup, I did read that.

I've not tried the tap yet, but I'm hoping as it's designed for golden eagle it should be a drop in modification.

Yup, easy as.  Going to take it back out, have a clean up and add some PTFE.