Beans_On_Bread_ Posted June 12, 2021 Share Posted June 12, 2021 I have recently purchased a Classic Army Nemesis x9. Works absolutely perfect however i am having difficulties with the magazine. It inserts and feeds as expected however the mag release is very stiff and requires a lot more force to eject. Is there any help or advice to fix this issue? Link to comment Share on other sites More sharing options...
RavenUK Posted June 12, 2021 Share Posted June 12, 2021 This can be normal with some mags. Sometimes they are stiff being inserted and ejected or sometimes mag release seems more stiff. You just need to ''break them in'' so to speak over time and it wont be an issue. Link to comment Share on other sites More sharing options...
Beans_On_Bread_ Posted June 12, 2021 Author Share Posted June 12, 2021 1 minute ago, RavenUK said: This can be normal with some mags. Sometimes they are stiff being inserted and ejected or sometimes mag release seems more stiff. You just need to ''break them in'' so to speak over time and it wont be an issue. Thanks a lot for the quick response, would have stressed about it more if you hadn’t have told me it isn’t an issue 👍🏼 Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted June 12, 2021 Supporters Share Posted June 12, 2021 Given how long and remote-ish that mag release mechanism is, I'd be minded to give it a squirt of silicone oil (if there's any plastic in the mix) or 3-in-1 (if it's all metal to metal). You may end up having to give the detent on the magazine a little kiss with a dremel or file to enlarge it fractionally (on the bottom edge, as the top edge is what's helping to hold it in place against the hop). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.