Ics Cxp 08

[sparky2008]

hi all I have a ics cxp 08 and would like to upgrade to 11.1 lipos can anyone recommend a good misfet  that will work with this gun also is it possible to get a different rear stock and rewire so the battery fits in the rear rather than on the front side of the gun  thanks😊

[Shamal]

3 hours ago, sparky2008 said:

hi all I have a ics cxp 08 and would like to upgrade to 11.1 lipos can anyone recommend a good misfet  that will work with this gun also is it possible to get a different rear stock and rewire so the battery fits in the rear rather than on the front side of the gun  thanks😊

I can recommend a lady i know called missfetish but I don't really think that will help you. Lol 😉👍

Regards 

[Speedbird_666]

4 hours ago, sparky2008 said:

hi all I have a ics cxp 08 and would like to upgrade to 11.1 lipos can anyone recommend a good misfet  that will work with this gun also is it possible to get a different rear stock and rewire so the battery fits in the rear rather than on the front side of the gun  thanks😊

 

Why 11.1v? You can get 16rps on a 7.4v with an SHS high torque motor on stock gearing with a decent trigger response.

 

Yes, you can fit a new rear stock - you'll need a new buffer tube to do so.

 

Kill two birds with one stone, buy an ICS rear-wired switch assembly with Mosfet pre-fitted.

 

 

 

[magaz]

or as an alternate to the rear wire switch assembly with mosfet, one of the CS4 S3 drop in lowers would do the trick. It has the SSS electronic trigger in there. I run them in a few of my ICS rifles, once of which I run on 11.1 with no issues.  - https://www.fire-support.co.uk/product/ics-cs4cxp-aeg-sss-lower-gearbox-rear-wired