Jriski Posted May 6, 2021 Share Posted May 6, 2021 I just recently acquired a We TECH MP5SD Apache! Its lovely and everything but I have noticed that the bolt does not catch after the magazine is out of rounds. So it continuously dry fires after out of ammunition. I do not think its a issue with the magazine because it does this with all 4 magazine I have. If I could get some help that would be a tremendous help, thanks! Link to comment Share on other sites More sharing options...
gunbod007 Posted May 6, 2021 Share Posted May 6, 2021 Okay so the bolt shouldn't hold open but it should stop after the last round. There is a little tab on the top left that you need to pull to the rear. If it is sticking straight up it disables the bolt stop on the mag to allow dry fire, but when to the rear the mag follower will trigger the bolt stop Link to comment Share on other sites More sharing options...
Korma Posted May 6, 2021 Share Posted May 6, 2021 Does the bolt lock back when you hold the magazine further up into the gun? Link to comment Share on other sites More sharing options...
sjhirst Posted May 7, 2021 Share Posted May 7, 2021 sorry i cant help, but may i ask where you bought the mp5 from? I can't find any in stock!! Link to comment Share on other sites More sharing options...
gunbod007 Posted May 7, 2021 Share Posted May 7, 2021 1 hour ago, sjhirst said: sorry i cant help, but may i ask where you bought the mp5 from? I can't find any in stock!! I got mine from KYairsoft. Prepare for long waiting times 10 hours ago, Korma said: Does the bolt lock back when you hold the magazine further up into the gun? No the MP5 bolt should not lock back but it should fire the last round and then not cycle again Link to comment Share on other sites More sharing options...
Cyberlawyer Posted May 7, 2021 Share Posted May 7, 2021 As already mentioned the MP5 should not lock back on the last round, In fact the real steel version doesn't do this either so that is no problem. On firing the last round (provided you haven't locked the dry fire button on the magazine down) you should get a 'deadmans click' as the trigger fires, but the weapon doesn't cycle (exactly what you get on a real mp5 when the hammer falls on an empty chamber). I you are not getting this and the MP5 continues to fire on an empty mag (and you have checked the magazines are not locked in dryfire mode and the magazine is working as it should and the catch at the rear flicks up when the last round is removed) then you probably need a new "part 31". https://www.kyairsoft.com/parts/we-smg-gbbr/apache-series/apache-series/we-apache-long-31-gbbr.html. It is a very thin part that moves the valve knocker up when the mag is empty so it doesn't hit the magazine output valve. I ordered one from KY and had it in a week. It was a doddle to fit and immediately solved my issue. Link to comment Share on other sites More sharing options...
Jriski Posted May 10, 2021 Author Share Posted May 10, 2021 I figured out the issue and it was not with the magazine. It was with the silver piece next to the firing pin(?). It completely sheered off. On 07/05/2021 at 03:06, sjhirst said: sorry i cant help, but may i ask where you bought the mp5 from? I can't find any in stock!! I got mine from swit airsoft. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.