Guest Posted April 17, 2021 Share Posted April 17, 2021 So, having never taken one apart, how much of a ball ache is it? I have a redline SFR that is showing the correct pressure on the gauge, but is not delivering enough pressure to the gun to cycle the bolt. Some pressure, but not enough. Deffo the HPA kit, mags and gun work fine on green gas. Any help will be much appreciated Ta rdb Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted April 17, 2021 Supporters Share Posted April 17, 2021 if memory serves @sjhirst did some service work on a balystik reg, think there was even a video. although your mileage may vary with different reg designs. Link to comment Share on other sites More sharing options...
sjhirst Posted April 18, 2021 Share Posted April 18, 2021 HI, yes I did a video of the Balystik regulator. I had a redline many moons ago, but never got to strip it down. Hopefully there won't be much more to it?! oooh, here we go: Link to comment Share on other sites More sharing options...
Guest Posted April 18, 2021 Share Posted April 18, 2021 1 hour ago, sjhirst said: HI, yes I did a video of the Balystik regulator. I had a redline many moons ago, but never got to strip it down. Hopefully there won't be much more to it?! oooh, here we go: Thanks buddy, I’ll get at it later 👍🏻 Link to comment Share on other sites More sharing options...
Guest Posted April 18, 2021 Share Posted April 18, 2021 Sorted, cleaned and lubed the regulator, now works perfectly, cheers @sjhirst @Adolf Hamster 😎 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.