Pewpewpetie Posted March 3, 2021 Share Posted March 3, 2021 Hi all, I'm pretty competent when it comes to v2 boxes but recently bought an ak from specna that has a v3 box in it. Problem is I had to change sector gear as somehow 2 teeth broke from the underside( not the side that engages the piston). Once fitted I noticed the back of the trigger catches on the sector gear. Any advice would be appreciated.. Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted March 3, 2021 Supporters Share Posted March 3, 2021 is it settled in it's pin ok? there's not normally much space but it absolutely should clear if it's all positioned ok. if it is in the right place then looks like the sector teeth are taller than normal, it could happen although i've personally never seen it. Link to comment Share on other sites More sharing options...
Misery Posted March 3, 2021 Share Posted March 3, 2021 looks to me the trigger is slightly out of line the back of the trigger block is slightly angled could just be my eyesit Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.