Not DMR Posted February 16, 2021 Share Posted February 16, 2021 Hi,I have a KWA Ronin T10 that I bought a few months ago, and it locks from time to time on semi-auto since the first day I played with it. I have done a lot of mods, and I will list all of it. Every time the AEG locks, when I switch to full auto, it works normally and cycles back again.Here is everything I have done to the AEG so far:1- 11.1V 20c Battery2- Gate PicoAAB mosfet (active braking) with total wiring replacement3- Rocket High Torque motor (16 TPA)4- 6.01 barrel5- 60 degree bucking6- Relub of gearsI still get locks on semi-auto from time to time. I just don't know what else I could do, if you guys could please help me solve this, I would really appreciate it. Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted February 17, 2021 Supporters Share Posted February 17, 2021 Imma place a bet that it's the active brake stopping the cycling too soon. Link to comment Share on other sites More sharing options...
Not DMR Posted February 17, 2021 Author Share Posted February 17, 2021 8 hours ago, Adolf Hamster said: Imma place a bet that it's the active brake stopping the cycling too soon. I started to think it was the AB too, but isn't it supposed to prevent the locking instead of causing it? Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted February 17, 2021 Supporters Share Posted February 17, 2021 35 minutes ago, Not DMR said: I started to think it was the AB too, but isn't it supposed to prevent the locking instead of causing it? nope, it's supposed to prevent overspin, but you need a fast setup for that to be a problem. Link to comment Share on other sites More sharing options...
Not DMR Posted February 17, 2021 Author Share Posted February 17, 2021 3 hours ago, Adolf Hamster said: nope, it's supposed to prevent overspin, but you need a fast setup for that to be a problem. Ok, i will change the mosfet and see what happens Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted February 17, 2021 Supporters Share Posted February 17, 2021 25 minutes ago, Not DMR said: Ok, i will change the mosfet and see what happens Even as a tester try without a mosfet to see if that really is the issue. Its why i tend to reccommend nanasr for basic mosfet duties. Link to comment Share on other sites More sharing options...
Not DMR Posted February 17, 2021 Author Share Posted February 17, 2021 14 minutes ago, Adolf Hamster said: Even as a tester try without a mosfet to see if that really is the issue. Its why i tend to reccommend nanasr for basic mosfet duties. I bought the X-ASR, lets see if it changes anything Link to comment Share on other sites More sharing options...
Not DMR Posted February 24, 2021 Author Share Posted February 24, 2021 On 17/02/2021 at 15:09, Adolf Hamster said: Even as a tester try without a mosfet to see if that really is the issue. Its why i tend to reccommend nanasr for basic mosfet duties. Hi, just want to let you know that replacing the mosfet fixed the problem, thank you Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted February 24, 2021 Supporters Share Posted February 24, 2021 Just now, Not DMR said: Hi, just want to let you know that replacing the mosfet fixed the problem, thank you good to know man, glad it was the right solution. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.