Jump to content

Mid cap disassembly


PopRocket123
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Posted

Does anyone know how to take this mag apart? It's a PTS 80 E mag but all of the guides I've found have been for the EPM. 

IMG_20200910_203043.jpg

IMG_20200910_203824.jpg

IMG_20200910_204155.jpg

Posted

Not sure but maybe its heat welded?

 

Posted

For anyone who cares I managed to get it open. It had been heat welded at the seams so I took a junior hacksaw to the bottom corners along the seams and got a knife in the gap to split it. Definitely irreversible without glue but it beats smashing it open.

Posted
9 hours ago, PopRocket123 said:

For anyone who cares I managed to get it open. It had been heat welded at the seams so I took a junior hacksaw to the bottom corners along the seams and got a knife in the gap to split it. Definitely irreversible without glue but it beats smashing it open.

 well done for getting it open.

I once bought some cheap mid caps which came apart when I was filling them. I used a hot soldering iron to spot weld them back together. Not pretty but worked lol

Regards 

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...