adamjudge6 Posted July 19, 2020 Share Posted July 19, 2020 Hi all I have a gen 3 fusion engine in my Krytac spr and am looking to upgrade it into a DMR. Ill be sending it off for a service as well to a reputable hpa company within the uk and they’ve suggested putting in a 6.03 barrel with a Maxx hop up, maxx flat nub arm and a maple leaf bucking. I’m not doubting them but I’m just wondering if anyone has experience with a similar setup or if there are things I can change out for the best range and accuracy!!! Thanks Adam Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted July 19, 2020 Supporters Share Posted July 19, 2020 aside from the barrel that's pretty much the setup i'm running. the fusion isn't as bad for tuning as the likes of the f2 but it might need dialed in. you're gonna want to be running good heavy ammo to get anything out of it. of course you'll be needing to program it to semi only, not sure if sites will be pleased with the notion of being able to set it to auto though. Link to comment Share on other sites More sharing options...
lukeB Posted July 20, 2020 Share Posted July 20, 2020 I'm about to try PDI 6.05, rhop patch, modify baton bucking, maxx hop with my dmr. (although it is an inferno) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.