paradoxum Posted July 8, 2020 Share Posted July 8, 2020 Gun chrono'd before any changes: 290 FPS, after mods / upgrades: solid 350 FPS. Chrono'd with an AC6000 BT. https://imgur.com/a/emHdLn5 I replaced the LAM with an X400V that has torch+strobe / red laser, as the stock LAM just had a dull torch and no functioning laser. I've still got a set of silver safety levers on the way that I'm going to install which I think will look better than the black, and I plan to colour-fill in the text on the slide with some silver nail polish. Full list of mods/upgrades: I'd like to swap the ABS plastic slide with a metal one from a standard TM Samurai Edge which is gonna cost me £150 for the gun and I don't know if the loading nozzle assembly will even fit, but probably going to give it a try. Magazines have been sealed at the bottom baseplates with black Visbella Silicone as they were leaking when using propane, fully sealed now. (M9 mags suck!) I've yet to receive the NEO-R release valve and I'm looking forward to testing that on the extended mag. If I like it I'll be getting another 3 for the other mags. I'm really happy with how it's turned out, I like the metal fluted barrel over the stock plastic one, and I was surprised to get such a big FPS boost after doing everything. Comments, critique, suggestions? Link to comment Share on other sites More sharing options...
strykerles Posted July 8, 2020 Share Posted July 8, 2020 don't know if it would work but a gen 1 WE slide might work and it would be cheaper too shame you didn't post a few days ago as I recently sold one 😂 Link to comment Share on other sites More sharing options...
paradoxum Posted July 8, 2020 Author Share Posted July 8, 2020 1 minute ago, strykerles said: don't know if it would work but a gen 1 WE slide might work and it would be cheaper too shame you didn't post a few days ago as I recently sold one 😂 I found a disassembly youtube vid and from what I can tell it doesn't look like the nozzle assembly will fit. I do like the two-toned metal silver slide of the WE gen 1 though. Link to comment Share on other sites More sharing options...
strykerles Posted July 8, 2020 Share Posted July 8, 2020 Thats a shame, damn marui for being the best I put this together from 2 boneyard pistols and a standard we samurai edge Fires around 310 and vents like a bitch on auto 😂 Link to comment Share on other sites More sharing options...
paradoxum Posted July 8, 2020 Author Share Posted July 8, 2020 1 minute ago, strykerles said: Thats a shame, damn marui for being the best I put this together from 2 boneyard pistols and a standard we samurai edge Fires around 310 and vents like a bitch on auto 😂 Yeah I'd love to be able to use that slide. Do you have it handy? If so, could you take the slide off and post some pics of the interior where the nozzle assembly is? I'm not sure if that metal 'plate' in the youtube vid is necessary or not. This is what this one looks like: https://imgur.com/a/CvjEDhA Link to comment Share on other sites More sharing options...
strykerles Posted July 8, 2020 Share Posted July 8, 2020 kids are in bed atm so i'll take some pics tomorrow and put them up Link to comment Share on other sites More sharing options...
paradoxum Posted July 8, 2020 Author Share Posted July 8, 2020 Just now, strykerles said: kids are in bed atm so i'll take some pics tomorrow and put them up Awesome thanks dude. Link to comment Share on other sites More sharing options...
strykerles Posted July 10, 2020 Share Posted July 10, 2020 My gun with the silver slide is a gen 2 and I believe the Albert pistol is a gen 1 so that slide wouldn't work as the safety system is different I've removed the slide from my black hen one and the pics are attached Link to comment Share on other sites More sharing options...
paradoxum Posted July 10, 2020 Author Share Posted July 10, 2020 Thanks. I took more pics of mine, what do you think? It kind of looks like the slide might fit the loading nozzle assembly frame, but it's hard to tell for sure. https://imgur.com/a/s0KoLBc Edit: Is that small bit of silver on the right side of yours the safety lever spring bit? Because this has that on the opposite side. Could that be the gen1 difference from the burton model? Link to comment Share on other sites More sharing options...
strykerles Posted July 10, 2020 Share Posted July 10, 2020 the internal layout looks slightly different to the WE slide, it may fit but might need some modifications if you could get a gen 1 WE m92 and swap the slide would be the easiest, it will save potentially screwing something up Link to comment Share on other sites More sharing options...
paradoxum Posted July 10, 2020 Author Share Posted July 10, 2020 Would this one do? http://airsoft-shop-japan.com/tokyo-marui-no-11-samurai-edge-standard-model-gbb-airsoft-gun/ It's TM so should be even more likely to fit, but trying to find pictures / disassemblies of the various models is almost impossible. It's a lot of money for just a slide, but I really want it to be metal 😐 and a regular M9 won't have any STARS markings on the slide etc. And It's not like I could sell the other gun after I swap the slide because I want to keep the wesker one because limited edition etc. Link to comment Share on other sites More sharing options...
strykerles Posted July 10, 2020 Share Posted July 10, 2020 looks like the same model, afaik it was only WE that did a full auto version with the different safety Link to comment Share on other sites More sharing options...
paradoxum Posted July 10, 2020 Author Share Posted July 10, 2020 Just saw this one: http://airsoft-shop-japan.com/tokyo-marui-biohazard-albert-w-model-01p-gas-blow-back-airsoft-gun/ Would probably work too, and even has ALBERT W. printing on the side, but it's even more expensive. Edit: Nevermind I think that's ABS anyway. Link to comment Share on other sites More sharing options...
strykerles Posted July 10, 2020 Share Posted July 10, 2020 does your model have the adjustable hop unit? Link to comment Share on other sites More sharing options...
paradoxum Posted July 10, 2020 Author Share Posted July 10, 2020 1 minute ago, strykerles said: does your model have the adjustable hop unit? Yeah. Link to comment Share on other sites More sharing options...
strykerles Posted July 10, 2020 Share Posted July 10, 2020 yours is a marui gen 2 then as I believe the original had a fixed hop tbh I didn't know marui did a metal slide Link to comment Share on other sites More sharing options...
paradoxum Posted July 10, 2020 Author Share Posted July 10, 2020 7 minutes ago, strykerles said: yours is a marui gen 2 then as I believe the original had a fixed hop tbh I didn't know marui did a metal slide I think the only option would be to get a plain TM M9 metal slide, but then I'd be missing the res evil branding on the side, so I'm just gonna say fuck it and call the gun done. Link to comment Share on other sites More sharing options...
strykerles Posted July 10, 2020 Share Posted July 10, 2020 fair enough, shame I sold my WE slide last week 😂 Link to comment Share on other sites More sharing options...
paradoxum Posted July 10, 2020 Author Share Posted July 10, 2020 Just now, strykerles said: fair enough, shame I sold my WE slide last week 😂 I'm still waiting for the silver safety levers and some nail polish to colour-fill in the text on the slide, then I'll post pics when it's done - gonna do STARS in gold, with the dots in silver and the rest white, should look nice. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.