Musica Posted October 21, 2019 Share Posted October 21, 2019 I can't seem to fill my TM 5.1 hi-capa magazines from my vertex can. The gas isn't going inside the magazine just spraying back. It's not the length of the nozzle as I tried even with the base plate off. Here is a picture of the can side by side with my 2.0 nuprol can. Anyone any ideas? Link to comment Share on other sites More sharing options...
EDcase Posted October 21, 2019 Share Posted October 21, 2019 Look at the diameter of the magazine fill valve. You will probably see that its smaller than normal. I have the same issue with a KSC Auto9. I haven't found a way around it yet. There may be an adaptor... Link to comment Share on other sites More sharing options...
Musica Posted October 21, 2019 Author Share Posted October 21, 2019 I don't have another gas magazine to compare against just three 5.1 TM hi-capa magazines. I did only try 1 of my magazines so might have a fiddle see if it's perhaps the magazine at fault. They sell an extender nozzle but not sure if that will help or not. https://www.amazon.co.uk/Abbey-Gas-Canister-Extension-Nozzle/dp/B00TB05F2I/ref=sr_1_2?dchild=1&keywords=Abbey+Gas+Nozzle+Extension&qid=1571667042&sr=8-2 Link to comment Share on other sites More sharing options...
Musica Posted October 25, 2019 Author Share Posted October 25, 2019 got the nozzle and it helped can be a bit messy but I got my magazine filled. Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.