paradoxum Posted June 26, 2019 Share Posted June 26, 2019 I got these MLOK sling adapters for my M41A PR, front one is fine on the barrel shroud but I had the rear on the stock, which was bad because it's not very strong and would eventually give out, so moved it just now to another point under the rear and took pics as I did it. Alright, I moved the MLOK sling attachment to the bottom rear off the stock rail and took pics as I went; Clip for screw in this hole. MLOK adapter over the holes. First screw in. Need to widen the hole on the MLOK mount for an M6(?) screw to screw into the female hole already there. Just used a drill with a larger size bit. Screwing each down. (Tight fit) Screwed down. Sling attached. Secure, no wobble. Sling attached, no longer on the stock. Just posting for posterity if anyone wants to do something similar. Link to comment Share on other sites More sharing options...
paradoxum Posted July 10, 2019 Author Share Posted July 10, 2019 Put a picatinny rail on the other side and a black battery peq box. Link to comment Share on other sites More sharing options...
paradoxum Posted August 13, 2019 Author Share Posted August 13, 2019 Added some rails to the front and mounted a decent peq box and torch with switch; https://imgur.com/a/DzljO7I Link to comment Share on other sites More sharing options...
AaronHorrocks Posted March 29, 2021 Share Posted March 29, 2021 I like your solution, and it looks pretty sturdy... But check out what I did. I started making these back in 2012, and it's a "drop in" part that fits inside of the void of the buttplate. The only tool needed to install these is a screw driver, and that makes it really easy for the end user. Every once in a while I'll run a production batch of them as a solution to the sling problem. https://www.youtube.com/watch?v=JYfXFbvzgxo Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.