Massive-Sasquatch Posted March 21, 2019 Share Posted March 21, 2019 Hello there. I have a Cyma M14 cm032, I was thinking of upping the fps and locking it to semi-auto to coincide with my site rules. Now... I've seen pictures and videos of other m14 which have been modded to shoot semi only. On the pics and vids it seems like they have just removed the selector switch. Is this possible? I don't want to break it but I hope it's as simple as that. Thank you. Link to comment Share on other sites More sharing options...
Supporters Lozart Posted March 22, 2019 Supporters Share Posted March 22, 2019 Yep, switch it to single and remove the selector knob (there's a little screw/pin holding it on). Leave all the selector gubbins in there just in case. Link to comment Share on other sites More sharing options...
BigStew Posted March 24, 2019 Share Posted March 24, 2019 On 21/03/2019 at 17:12, Massive-Sasquatch said: Hello there. I have a Cyma M14 cm032, I was thinking of upping the fps and locking it to semi-auto to coincide with my site rules. Now... I've seen pictures and videos of other m14 which have been modded to shoot semi only. On the pics and vids it seems like they have just removed the selector switch. Is this possible? I don't want to break it but I hope it's as simple as that. Thank you. I would check with the site what there requirements are for a DMR as they may require a mechanical lock to prevent the gun being able to fire full auto. just removing the selector switch wont prevent the selector mech from moving. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.