LordRonin Posted February 16, 2019 Share Posted February 16, 2019 Hey so as you can see in the title my gearbox wont close due to the tappet plate, it wont stay in place when closing anyone have any tips or help? thank you Link to comment Share on other sites More sharing options...
Iceni Posted February 16, 2019 Share Posted February 16, 2019 There's a sweet spot on the sector gear where the tappet plate isn't engaged. Look on the sector gear and put the bit that pulls on the tappet plate at about 3 o'clock. In that position, the tappet plate should be at it's most neutral. Link to comment Share on other sites More sharing options...
johnnyj Posted February 16, 2019 Share Posted February 16, 2019 Also press the nozzle in once as this sometimes helps the tappet to fall in to the rails once the 2 halfs are nearly fully closed Link to comment Share on other sites More sharing options...
LordRonin Posted February 16, 2019 Author Share Posted February 16, 2019 @johnnyj . @Iceni Thanks for the help, turns out the Tappet didnt have the grooves at the front, dremmeled it and now it works perfectly Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.