snuff Posted December 31, 2018 Share Posted December 31, 2018 Firstly I'm not that technically apt,I'm replacing my trigger contacts and I decided I may as well fit a Mosfet. My question is are the Gate Nano's genuinely plug and play,I don't want burst fire or anything other than to reduce the voltage to the contacts.Thanks. Link to comment Share on other sites More sharing options...
Asomodai Posted December 31, 2018 Share Posted December 31, 2018 Its as plug in and play as you can get with MOSFETs. Personally I wouldn't go with an active braking MOSFET unless you are experiencing overspin issues. I find they lock up the gun on semi more often then with no MOSFET. Link to comment Share on other sites More sharing options...
snuff Posted December 31, 2018 Author Share Posted December 31, 2018 I didn't realise it was an AB mosfet,I was avoiding them. I have a std mosfet in my spare M4 that I'm stripping I could use.Any Mosfet suggestions,simple fit if possible Link to comment Share on other sites More sharing options...
snuff Posted December 31, 2018 Author Share Posted December 31, 2018 All sorted I can get a genuine ICS trigger switch with a built-in mosfet for less than £40,and as I'm changing the switch it seems to make sense + less fiddling around for me,cheers fro your help. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.