Jake bowler Posted October 5, 2018 Share Posted October 5, 2018 So a while ago I bought a raven g series mag and it does nothing but leak, any ideas as what I need to fix it? Don’t wanna waste money Link to comment Share on other sites More sharing options...
E21A Posted October 5, 2018 Share Posted October 5, 2018 Already wasted money buying it, but it would help if you told us where it’s leaking from? Link to comment Share on other sites More sharing options...
Hami Posted October 5, 2018 Share Posted October 5, 2018 If its not from a valve, red gasket sealant works amazingly well Link to comment Share on other sites More sharing options...
Jake bowler Posted October 5, 2018 Author Share Posted October 5, 2018 2 hours ago, E21A said: Already wasted money buying it, but it would help if you told us where it’s leaking from? From the bottom of the mag Link to comment Share on other sites More sharing options...
Wo1f Posted October 5, 2018 Share Posted October 5, 2018 If you’re referring to the valve on the bottom, you can unscrew it, put some silicone oil on the o ring and screw it back in. If you’re on about the big seal on the base, remove it and either use sealant or a few wraps of ptfe tape and put it back together. If you do use sealant, let it dry for a day or so before you put pressure through it Link to comment Share on other sites More sharing options...
Guest Posted October 5, 2018 Share Posted October 5, 2018 I hope it’s better quality than my Umarex G17 mag. I had to re-grind the oring seat to stop it leaking Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.