Dritler Posted July 4, 2018 Share Posted July 4, 2018 Recently bought a EBB bolt m4 and it came with a suppressor that I have no clue about how to fit it or what make it is, need help to know what make it s Link to comment Share on other sites More sharing options...
MisterG Posted July 4, 2018 Share Posted July 4, 2018 Hi Normally you would unscrew the flash hider from the front of the barrel and then screw that on to the end of the barrel. All the suppressors I have seen have a 14mm female threaded hole one one end, so that is the end you screw on. Sometimes you need to screw it on the opposite direction you would normally screw something, i.e. counter clockwse. I don't know the brand though. Cheers G Link to comment Share on other sites More sharing options...
PopRocket123 Posted July 4, 2018 Share Posted July 4, 2018 That's a nuprol QD suppressor. It comes with a specific muzzle break that it slides onto then you twist the collar and it locks on. Have you got a photo of the muzzle break that's on the gun? Link to comment Share on other sites More sharing options...
Dritler Posted July 4, 2018 Author Share Posted July 4, 2018 Link to comment Share on other sites More sharing options...
PopRocket123 Posted July 4, 2018 Share Posted July 4, 2018 That's not the nuprol one so I doubt it'll lock on. You can try though. The notch on the muzzle brake is the bottom, align the suppressor so the catch on the collar is at the top and have a fiddle to see if you can make it fit, try both positions on the catch. Link to comment Share on other sites More sharing options...
callumbagshaw Posted July 5, 2018 Share Posted July 5, 2018 The flash hider already attached looks a lot better than that suppressor will anyway IMO, nice piece Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.