alsknvfvnzikusg Posted June 18, 2018 Share Posted June 18, 2018 i heard that i should use silicone oil for the pistonhead, o-rings and plastic parts. And that i should use something with a higher viscosity for the gears and metal piston teeth with teflon grease. is teflon grease conductive? i dont wanna short circuit the trigger stuff Link to comment Share on other sites More sharing options...
Davegolf Posted June 18, 2018 Share Posted June 18, 2018 Nothing in an AEG gearbox should be 'hot' i.e. Positive or negative. Wether grease is conductive or not doesn't matter. You could use copper slip if you really wanted You want silicone grease not oil. Either use a white grease or Moly Link to comment Share on other sites More sharing options...
alsknvfvnzikusg Posted June 18, 2018 Author Share Posted June 18, 2018 oh wait i thought you should use silicone oil on the plastic and rubber stuff? Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.