ronniep Posted April 19, 2011 Share Posted April 19, 2011 i wud like help with making my m4 more accurate. i am useing polished/ seamless bbs. i also have been playing with the hop up but that doesn't seem to be the prob' as the bbs seem to be araticly landing in a 4 inch diameter circle can i change the barrel to a thinner inner barrel without causing probs, if so which barrel is best Link to comment Share on other sites More sharing options...
Supporters M_P Posted April 19, 2011 Supporters Share Posted April 19, 2011 What make is it. I would put a madbull black python vers 2 in it- 6.03 Link to comment Share on other sites More sharing options...
ronniep Posted April 19, 2011 Author Share Posted April 19, 2011 It's an M4 A1 Link to comment Share on other sites More sharing options...
Supporters M_P Posted April 19, 2011 Supporters Share Posted April 19, 2011 yeah.... what make Link to comment Share on other sites More sharing options...
ronniep Posted April 19, 2011 Author Share Posted April 19, 2011 its a commando m4a1 Link to comment Share on other sites More sharing options...
Supporters M_P Posted April 19, 2011 Supporters Share Posted April 19, 2011 yes, but what brand makes it? Link to comment Share on other sites More sharing options...
ronniep Posted April 19, 2011 Author Share Posted April 19, 2011 don't know it is a mis match of dif parts i think. will find out tomorrow from the person i bought it from. Link to comment Share on other sites More sharing options...
Tristan Orr Posted April 29, 2011 Share Posted April 29, 2011 best bet here is to take the barrel out and measure it so you can see which barrel your going to need fitted. Marksman you should know better then to suggest the Madbull inner barrels! Personally I would go for Prometheus 6.03 EG Barrel Steel inner Barrel and as its a AEG don't put in a 6.01 as your just have jam after jam after jam in it. Also you could put a systema hop rubber in it Link to comment Share on other sites More sharing options...
Supporters M_P Posted April 29, 2011 Supporters Share Posted April 29, 2011 They are better yes, but I don't think they warrant the extra 20 quid Only use 6.01 in a sniper Link to comment Share on other sites More sharing options...
Tristan Orr Posted April 29, 2011 Share Posted April 29, 2011 I wouldn't even use a 6.01 in a sniper still a 6.03 its got something to do with the air compression around the BB.... can't really explain it. Link to comment Share on other sites More sharing options...
Dan_uk86 Posted April 30, 2011 Share Posted April 30, 2011 I have a SRC m4a1 and im having same kind of problems which could be both hop up and air compression. when hop up is on even slightly it tends to jam alot (using polished bbs) so im not really able to adjust the hop up much. What is the difference in the hob rubbers? and what would be the best method of improving air compression? Link to comment Share on other sites More sharing options...
Nex Posted April 30, 2011 Share Posted April 30, 2011 I love dishing out this link. http://airsoftsniper.proboards.com/index.c...=1291&page1 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.