Jump to content

Question on G36c


Telahsaurus
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Posted

Yo,  I have a G36c (technically Ares056)

I was wondering if any knew the barrel mm as I wanted to get a tracer unit for it and can’t seem to find it anywhere. Any advice would be welcome and if any units recommended would be brilliant. Thanks 

Posted
1 minute ago, Georgeturner2001 said:

14mm clockwise I think

Ok thanks mate, and tracer units you would recommend? 

  • Supporters
Posted

Ares G36 is a 14mm clockwise as said above which mean you will need a 14mm female CW to 14mm male CCW adapter to run a tracer.

 

Best tracers are the Xcortech XT501 and ACETECH at-1000. The lighter mentioned above while great and compact is really designed for pistols and can have issues with full auto. The Xcortech XT301 that is just releasing is a better compact unit as its rated to 35rps so no full auto issues.

Posted
50 minutes ago, ImTriggerHappy said:

Ares G36 is a 14mm clockwise as said above which mean you will need a 14mm female CW to 14mm male CCW adapter to run a tracer.

 

Best tracers are the Xcortech XT501 and ACETECH at-1000. The lighter mentioned above while great and compact is really designed for pistols and can have issues with full auto. The Xcortech XT301 that is just releasing is a better compact unit as its rated to 35rps so no full auto issues.

Thanks pal. https://m.ebay.co.uk/itm/Airsoft-CW-to-CCW-Barrel-Thread-Adapter-14mm-Outer-Barrel-/222720319344 like this one?

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...