Allen428 Posted December 30, 2017 Posted December 30, 2017 I’ve got a Prometheus inner barrel and a eagle6 m100 spring to fit. Is this easy to do or get a tech to do it? thanks
Davegolf Posted December 30, 2017 Posted December 30, 2017 Using the Haynes manual scale; The inner barrel is a 2 spanner job, the springs is a 5 spanner job. Spring is involved to get to and on that particular model possible to damage your rear wiring quite easily (assuming sopmod / rear wired) What tech you done previously?
Allen428 Posted December 30, 2017 Author Posted December 30, 2017 Ok thank you, I’ve never done anything to a airsoft weapon before, was willing to have a go but not if there’s to much risk doing any damage.
Davegolf Posted December 30, 2017 Posted December 30, 2017 It's one of those things, if you were tech savvy and generally mechanically minded I'd say go for it, there's plenty of tutorials online. On the other hand that is a very nice gun and you'll need a stock tube spanner as a 'special tool'. AEGs can be fiddly to the inexperienced, we all have to start somewhere, just normally on a cheapo gun
Allen428 Posted December 30, 2017 Author Posted December 30, 2017 Thanks for response. Think I will get someone to do it for me. Have thought for a while about getting a cheap second hand aeg to strip and practice on.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.