Kiran Posted April 23, 2017 Posted April 23, 2017 So I bought an MK23 from my airsoft site and was trying to adjust the hop up and now I cant figure out how to put the slide back on! I was wondering if any of you know how to or know of any detailed videos on how to put the slide back on! Thanks Kiran
Head Moderator Jedi_Master Posted April 23, 2017 Head Moderator Posted April 23, 2017 You do not say what brand your Mk23 is. I have the TM version; the upper slide simply fits onto the lower frame but does not slide all the way from the front or it will jam. I have not taken mine apart for a while but IIRC just position the upper about 3/4 along towards the rear, carefully push down onto the frame in front of notches and then slide it back a short distance. Slide back upper until you see the hole for the slide lock/release pin and fit the pin. A simple search on YouTube will list several videos, try "reassemble mk23 pistol"
Sacarathe Posted April 23, 2017 Posted April 23, 2017 16 minutes ago, Jedi_Master said: A simple search on YouTube will list several videos, try "reassemble mk23 pistol" "airsoft"
PopRocket123 Posted April 23, 2017 Posted April 23, 2017 I've got this exact make. It's a bit of a fiddle but there's a knack. There are slots near the back, on the sides of the hammer, with a gap in the middle. Slot the back of the slide into there and lower the front down then slide the slide back. It should engage on the rails then you can push the pin in and let the slide move forwards.
Kiran Posted April 23, 2017 Author Posted April 23, 2017 14 minutes ago, PopRocket123 said: VID_20170423_170408.mp4 Thanks a lot. it is back on now
PopRocket123 Posted April 23, 2017 Posted April 23, 2017 No problem. It took me a while the first few times.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.