Speedle Posted February 18, 2011 Posted February 18, 2011 Hi Guys Just upgraded my TM G36 with a M100 spring after a very disappointing chrono last sunday of 280-285fps. I've changed it over test fired and all seems good so I'm hoping it will now be more in the 320-328fps range. As I was stripping down the gearbox and various parts using a guide from Mechbox I noticed they replaced all manor of piston parts, nozzles and the such. Having little experience on upgrading I was wondering if anyone could advise what's worth doing and what's worth steering clear of. And also if I should have upgraded anything to support the new spring. The gearbox is an otherwise stock V3 with a TM EG1000 motor Cheers Mat
jakmoon Posted February 18, 2011 Posted February 18, 2011 wow realy .. as far as im aware mine is standard... and mine chronoed at 295 last time :/ this has almost put me off upgrading mine, think ill keep an eye on this and take note
Supporters Matt! Posted February 18, 2011 Supporters Posted February 18, 2011 You've got a tokyo marui, one of the reliable airsoft manufactures, don't touch anything
MZKaleem Posted February 18, 2011 Posted February 18, 2011 yh dont open it up, i was told by a friend his JG has lasted him 3 years, he hasnt touched a screw!
Speedle Posted February 21, 2011 Author Posted February 21, 2011 cool thanks guys I'll just leave it be now then I must say when I was stripping it down I was very impressed with the quality and level of engineering of the TM gearbox
Recommended Posts
Archived
This topic is now archived and is closed to further replies.