ikarma70 Posted January 26, 2015 Posted January 26, 2015 Hi guys, simple question as in the title, no YouTube vids as I have a crap internet signal tonight. Thanks Andy
Supporters Samurai Posted January 26, 2015 Supporters Posted January 26, 2015 Like this one? Apart from the fact that he is filming mostly a blank table. Once you get the frontset separate from the body, there are 2 screws holding the hopup. Just undo them and slide the barrel with the hopup out.
ikarma70 Posted January 27, 2015 Author Posted January 27, 2015 The reason I said no YouTube videos is because the video and audio is out of sync so they are useless! Can I remove the barrel assembly without stripping everything else down?
Supporters Samurai Posted January 28, 2015 Supporters Posted January 28, 2015 Is it the TM colne? The one with 2 screws in the magwell, 2 in front of that on the bottom if the gun? If it is, undo those. If it's vfc clone then Check this: http://www.airsplat.com/Items/ERM-BI-74U-RK01.htm
ikarma70 Posted January 28, 2015 Author Posted January 28, 2015 I do believe the dboys is a vfc clone as it's mostly steel.
ikarma70 Posted January 28, 2015 Author Posted January 28, 2015 No screws in the mag/barrel join area so it's not a tm copy.
Supporters Samurai Posted January 28, 2015 Supporters Posted January 28, 2015 Great, then it's a vfc. Check that link in my last post. One thing to be careful about is if the rear sight block is not steel (check that with magnet) then it's easy to break it by turning the barrel sideways accidentally when you wiggle it out.
Recommended Posts