JerseyRider Posted November 18, 2010 Share Posted November 18, 2010 Hi all, My JG M4 CQB is getting abit old for me, so i thought i would beef it up abit.... What i am going to do: New matt black paint job for upper/lower reciver (i hate that gray colour) Reroute batt wires to the front and into PEQ box for ease of life Upgrade accurcy with tightbore and HU Some gearbox work My to buy list: Krylon Fusion - Matt Black £6.50 Madbull Black Python Ver.2 6.03mm Tight Bore Barrel (363mm) - £29.99 SRC KA Style Silencer Long (160mm) - £19.99 Tactical Folding Foward Grip - £11.99 Madbull Ultimate 3 in 1 Hop Unit for M4/AR series - £24.99 PEQ Box - To be found Tac Light + Lazer?? - To be found New Tac Stock - Got from a mate Current Total: £93.46 Before Step one Stripping down for painting I thought while i waited for the stuff to come down from Action Hobbies i would at least prep the M4 for paint. I started with seperating the upper and lower recivers but popping out the rear body locking pin first, then the front locking pin. Then i removed the motor plate from the pistol grip and removed the motor to get to the two small screws that hold the pistol grip into the gearbox. Then to remove the gearbox the small body pin, mag release catch and hop up had to come out, as dose the stock screw. Then, makeing sure the fire selector is set to semi, i lifted the gearbox out of the lower reciver and also removed the other little body bits includeing the fire selector and fake bolt release catch. To prevent the RIS rkit getting sprayed i removed that from the upper reciver. Step two Preping for painting First of i made sure that everything i didnt want sprayed to be masked up with masking tape, these bits include things like the dust cover and delta ring. Then useing a fine grade sand paper, i used 320 grade paper, then i roughed up the surfaces to be painted. Then i degreased all of the surfaces to get rid of all the paint dust that is left behind. Stay tuned for more...... Thanks Jack If you have any hints tips or comment i am open to them Any help would be nice as this is abit of a new one for me Link to comment Share on other sites More sharing options...
JerseyRider Posted December 7, 2010 Author Share Posted December 7, 2010 Just finnished the spray job guys i will post pics up as soon as i figure out how to get these pics out of my phone! Link to comment Share on other sites More sharing options...
AF-UK Founding Member Deva Posted December 7, 2010 AF-UK Founding Member Share Posted December 7, 2010 Nice, look forward to seeing it. Link to comment Share on other sites More sharing options...
JerseyRider Posted December 7, 2010 Author Share Posted December 7, 2010 Step Three Painting The Before shot.... As you can see some parts where from a M4 that has been sprayed a kinda 2 tone OD job so they had to be sprayed as well.... TOP TIP!! If you carnt find kroylon paint dont worry!!! any acrylic based paint will stick like sh*t I used a Car branded (Hycote) spray paint and the finnish is.... well judge for your self later on! Now the first thing to understand about arosole spray jobs is to build up the layers very slowly and dont cake it on.... for the first layer of primer (again acrylic) i hardly put a thin layer on... and slowy added layers and then the same with the Matt Black... Why use primer?? Two reasons my dear children.... 1. It grips to the surface alot better then normal paint and leaves a roughish surface perfect for normal paint to cling onto giving it a smoother finnish and alot longer life time 2. When the paint dose eventually start to wear it will leave nice nice two toned weatherd look After this project i might reolise a full guide on how to spray paint (if there isnt one on here already) Now for the beauty shots!! Now the pictures arnt the best... but that ant my hobbie is it now lol Any comments/opinions would be gratefull.... Now i have got my order through thats the next thing to get on to So stay tuned!!! Link to comment Share on other sites More sharing options...
Supporters Matt! Posted December 7, 2010 Supporters Share Posted December 7, 2010 looks nice, the KA silencers look godly, maybe you should get a used CA metal body? Link to comment Share on other sites More sharing options...
JerseyRider Posted December 7, 2010 Author Share Posted December 7, 2010 Simply dont have the money Matt i would of went for a full metal kit if i have the money but ah well.... at least it looks more metalish now! And i have had the KA on and god it is a beast lol i will leave it to the finalily picture Link to comment Share on other sites More sharing options...
Supporters Matt! Posted December 7, 2010 Supporters Share Posted December 7, 2010 will be waiting for it will get a pic of my CQB for you. SRC v3 gearbox CA body CA Old style stock Dboys RIS Dboys Grip & PEQ Dboys Carry handle cut down to CQB sight Element Barrel (inner and outer) CA Hop (I think) The grips black now, was tempted to get a longer barrel and stick the KAC silencer on it Thanks goes out to Nutster for the build Link to comment Share on other sites More sharing options...
JerseyRider Posted December 7, 2010 Author Share Posted December 7, 2010 I am jelous lol It dose look alot better with the metal body like... but i think the KA will make up for that Link to comment Share on other sites More sharing options...
Supporters Matt! Posted December 7, 2010 Supporters Share Posted December 7, 2010 get some pics up Link to comment Share on other sites More sharing options...
JerseyRider Posted December 7, 2010 Author Share Posted December 7, 2010 I wouldnt want to rune the surprize Matt Link to comment Share on other sites More sharing options...
Supporters Matt! Posted December 7, 2010 Supporters Share Posted December 7, 2010 haha jersey. Link to comment Share on other sites More sharing options...
JerseyRider Posted February 11, 2011 Author Share Posted February 11, 2011 Right I have finnished the outside looks of the great M4 CQB but it ant very cqb length any more.... Up agenst my S-System its practically the same length..... Ah well there is just a couple more things to do Buy a new 2 peice hop up as my 1 peice dont fit And Buy a PEQ Batt box (i have already found a away to route the wires as you will see in the pic soon) Pics soon!! Link to comment Share on other sites More sharing options...
Supporters Matt! Posted February 11, 2011 Supporters Share Posted February 11, 2011 guessing you got a plastic body on it from the wanting of the 2 piece hop Link to comment Share on other sites More sharing options...
JerseyRider Posted February 11, 2011 Author Share Posted February 11, 2011 Yer but only fingured that i needed the 2 peice when i was putting it all back to gether! It was the Madbull 1 piece as well! Ah well.... any reccomended 2 peices HUs then? Link to comment Share on other sites More sharing options...
Supporters Matt! Posted February 11, 2011 Supporters Share Posted February 11, 2011 hmmm, Tokyo marui if you can get one! if not then SRC Link to comment Share on other sites More sharing options...
JerseyRider Posted February 11, 2011 Author Share Posted February 11, 2011 Thanks Matt Link to comment Share on other sites More sharing options...
JerseyRider Posted February 11, 2011 Author Share Posted February 11, 2011 So here are the shots... took on my new Cam which i am very pleased with Link to comment Share on other sites More sharing options...
Supporters Matt! Posted February 11, 2011 Supporters Share Posted February 11, 2011 Beauty! Loving the silencer Not a fan of that folding grip but if it works for you than fantastic! The CQB above, ive sold and got a new one that needs a little TLC once shes complete will get some pics up! Btw whats with the wires? seem to be coming out of the bolt you getting a ready mag and wiring it through? Link to comment Share on other sites More sharing options...
JerseyRider Posted February 11, 2011 Author Share Posted February 11, 2011 No that beaucse i dont have a hole in the delta ring so that was the only solution was to take the Bolth catch out and use the small hole it left behind to feeed the wired through and i was going to wire it into a a PEQ Box But what is this read mag thing your talking about? Link to comment Share on other sites More sharing options...
Supporters Matt! Posted February 11, 2011 Supporters Share Posted February 11, 2011 http://www.airsoft-emporium.co.uk/images/u...0CRW_bigpic.jpg you can use a fake mag to store a battery. Link to comment Share on other sites More sharing options...
JerseyRider Posted February 11, 2011 Author Share Posted February 11, 2011 Ah that is a good idea Matt.... Know anywhere i could get one of these? Link to comment Share on other sites More sharing options...
Supporters Matt! Posted February 11, 2011 Supporters Share Posted February 11, 2011 sure Try here http://www.landwarriorairsoft.com/cgi-bin/...aGP047A#aGP047A Edit just said out of sock might wanna contact them! Link to comment Share on other sites More sharing options...
JerseyRider Posted February 11, 2011 Author Share Posted February 11, 2011 I carnt see how it attaches on? any idea? And is there a fake mag Batt box on the market or is it somthing i wil have to figer out my self? Link to comment Share on other sites More sharing options...
AF-UK Founding Member Deva Posted February 11, 2011 AF-UK Founding Member Share Posted February 11, 2011 It basically just attaches to your current mag and the gutted one which you put the battery in. So you effectively have 2 connected together. Link to comment Share on other sites More sharing options...
JerseyRider Posted February 11, 2011 Author Share Posted February 11, 2011 My current mag? But that would mean i would only be able to use one mag a game! lol Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.