UberDemon Posted June 14, 2012 Share Posted June 14, 2012 Hey peeps I have a vsr gspec that currently has a m100 spring in I think, its fireing about 318fps on the chrono. I was thinking of putting a m120 spring in to boost it to 400fps I only have enough for the spring to start with, how long would it last untill I needed to upgrade the rest? Would other parts break? Sorry if it's a stupid question I have no idea on it lol. Hope to hear soon Cheers Link to comment Share on other sites More sharing options...
paperpirate Posted June 15, 2012 Share Posted June 15, 2012 just popping a big spring in would cause wear and tear on the rest of the internals and make them break, a spring is one of the last things you should do (or what i did) with it being sub 350 you dont have to worry about engagement distances and can get used to the role of sniping. spring guide, high pressure piston, piston sear, trigger sear and a tight bore will get you more reliable results then you can whack your big spring in. bits like silenced cylinder heads can be put in later, just dont waste your money on barrel spacers, leccy tape and five minutes does the same job hope that helps a bit mate Link to comment Share on other sites More sharing options...
UberDemon Posted June 15, 2012 Author Share Posted June 15, 2012 just popping a big spring in would cause wear and tear on the rest of the internals and make them break, a spring is one of the last things you should do (or what i did) with it being sub 350 you dont have to worry about engagement distances and can get used to the role of sniping.spring guide, high pressure piston, piston sear, trigger sear and a tight bore will get you more reliable results then you can whack your big spring in. bits like silenced cylinder heads can be put in later, just dont waste your money on barrel spacers, leccy tape and five minutes does the same job hope that helps a bit mate Okay cool this will be one of my last games for a while as I'm going away for work, would the spring itself hold up for a game day? What do all the other parts help with? Power or accuracy? Cheers Link to comment Share on other sites More sharing options...
paperpirate Posted June 15, 2012 Share Posted June 15, 2012 the spring would be fine for a while, but would just break the standard internals after a while, the upgrades just mean its more consistant, meaning more accurate in airsoft terms and can handle the power Link to comment Share on other sites More sharing options...
Supporters Airsoft-Ed Posted June 15, 2012 Supporters Share Posted June 15, 2012 If all the other stuff is going to be upgraded anyway, which I imagine would include completely replacing a lot of the stock parts, then I figure you might as well put a stronger spring in it until it breaks. 'Cos all the old parts are coming out anyway, you might as well make the most out of them, I doubt they'll ever get used again once they're removed. Might as break them before replacing anything. Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.