Jump to content

WE M14 GBB


crazydan
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Hi all,

 

Ive got my self a WE M14 and Ive had nothing but trouble with it. I upgraded Nozzle to get 500FPS as I'm using it as a DMR. Now when I fully load the magazine with propane and bb's take 1 or 2 shoots then half of the gas fires out the magazine and makes a HISSSSSING noise. Also sometimes it double feeds 2 bbs into the chamber.

 

I think the magazine has a feeding problem which there for it making the gas fire out the magazine but I'm not sure. Does anyone have any ideas of how to fix this problems?

 

Thanks

Dan :P

Link to comment
Share on other sites

Have you tried with other magazines or just one?

 

I Bought a second magazine and installed a 30 round spring that came with the gun, and the gun has even more problems with that magazine. I might put the 20 round spring back in and see if it is still the same.

Link to comment
Share on other sites

Is there any obvious damage to the feeding area of either mag?

Have you tried different weights and brands of bb?- that might help with feeding

There doesn't seem to be any damage to the magazines, Ive tried .20g bb's and tried .28g bb's and the .28s are Blaster Devils.

Although after the Skirmish this Sunday gone, the top of the magazine (part where the bbs get fed into the chamber) Had snapped of completely.

Link to comment
Share on other sites

  • 11 months later...

I think it is probably the gun which doesn't let gas feed properly from the mag, the mags are probably okay. As for the bbs double-feeding, The mags might have a too powerful spring in them or the bbs you are using could be the problem. Also, I recommend that you check the chamber and all parts involved with feeding the bbs, just to check that it isn't the gun.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...