Jump to content

Rewiring to deans..and a problem.


Saltyyy
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Foolish me wants to re-wire to deans and made the idiot mistake of cutting both wires of my battery....for a split second both cables connected to sparked, the wires were then hot.

 

Lucky it's a NiMH so it didn't explode...but is the battery screwed now or is it okay to use still?

 

Also, I've heard alot of people bending the connectors on the deans plugs when soldering, is there anyway to overcome this easily?

Link to comment
Share on other sites

  • AF-UK Founding Member

Issue 1: The battery could be screwed, but it may well not be. I've had the same thing happen previously and they were fine. It was literally only a split second they touched for.

 

Issue 2: Make sure you plug the deans together when you solder. That way a) the pins stay straight even if you have the iron on there for a while and b-) you have more you can stick/hold down. I find a nice big blob of blu-tack works well to stick them down on!

Link to comment
Share on other sites

Issue 1: The battery could be screwed, but it may well not be. I've had the same thing happen previously and they were fine. It was literally only a split second they touched for.

 

Issue 2: Make sure you plug the deans together when you solder. That way a) the pins stay straight even if you have the iron on there for a while and b-) you have more you can stick/hold down. I find a nice big blob of blu-tack works well to stick them down on!

 

Thank you very much sir for the fast reply! I'll have to give it a try after the connections done, if not, hey, I have plenty more batteries.

Link to comment
Share on other sites

as long as its not lipo your fine ive done it on a car battery for about 2 seconds by dropping a spanner on it and the battery was fine.but dont do it on purpose as it will explode.trust me

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...